hi again ,,, ok zl 2m beam , i got the swr down on this to ,, 1.1   --- 1.4     .all is fine and did work fine for how long i had it up ,, my next door was on a moaning streak,,, any way , the bad bit about the antenna , is i lost the 300ohm ribben line thats is 10 inch long , but used a diff type of wire ,,, all is fine , with 300 ohm on the 2 dubble folded dipole,s you only needed 6 inch matching cross hair stub, well with my upgrade you need 11 inch matching stub...  i mean how on earth do they thing that pll can get 300ohm lead in that that very small hole ... i did cut the one of the top cap,s to allow all the coax and other wire,s to fit in , and then seal it with a silcon.... all is fine ,,, happy days

you are only getting the 2 meter antenna thats the biggest  one