SET OF 3 MIXED SHELVES - FANCY RAT CAGE LEDGES

 HAND MADE AND TESTED ON OUR ANIMALS!
YODA, OUR SHELF INSPECTOR, APPROVES.

CLICK ON YODAS NOSE TO SEE MORE SHELVES!!

 Only untreated, natural pine wood is used for the Nibble Shelves - the only treatment it receives is being kiln-dried to sterilise against any natural spores or bacteria that may have been present in the tree. Kiln-drying the wood also removes virtually all of the Phenol from the wood - this is the natural sap that gives pine it's fresh smell, but it is also a natural acid and if consumed in large quantities, it can give your pet digestive problems, particularly in rats.

The shelves will fit any animal cage with mesh up to 1" or 25mm, or barred cages with 1/2" or 13mm spacing. Different fitments can be supplied if required (although they are not suitable for Rotastak or Habitrail style Gerbil and Hamster housing)

Each Nibble shelf is held in place using 40mm screws and 30mm washers. Enough fixings are supplied with each shelf to ensure a secure and stable fitment, without stressing or damaging the animal cage bars. This also keeps the shelf close to the bars, reducing the risk of your pet catching it's limbs in any gaps.

All fixings are flush against the outside of the cage to prevent any damage to your interior walls, or to stop you catching clothes which may happen when using wing-nut type fastenings. Attaching the shelves requires nothing more than a cross-head screwdriver. All fixings are pre-drilled and threaded, minimising the effort needed to install them in the cage.

No metal fixings are within "nibbling range" so your pet will not be able to detach the shelf from the cage, not will your pet injure itself on any screws. Your new pet will be curious when the ledge is first installed, so all exposed edges of shelves are sanded smooth and checked for splinters before despatch.