Conical Bio Diesel Biodiesel Processor Reactor Kit 65 L

Oilybits Bio Diesel Processor Kit - 65 LITRE VERSION

Please read this information fully before proceeding, as it explains what tools & other equipment you need to complete installation. It also explains what the optional extras are for post production purifying

With hundreds now sold, this simple Bio Diesel Processor Kit will enable you to construct the basis of a comprehensive Bio Diesel Processor

Unlike other Systems, this kit features a 16-Element Oilybits Static Mixer, which will ensure a completely homogenous 100% mix of the ingredients going through it, leading to a far greater purity of fuel over standard "slosh" or "velocity" mixing. The system also features a branch upstream of the pump, into which an 8mm hose enters via a ball valve, this inlet is for Methoxide. By adjusting the ball valves to the methoxide and to the tank, the concentration of inducted Methoxide can be controlled to ensure that the liquid entering the tank is never flammable, the inducted methoxide is mixed almost immediately with the inducted vegetable oil via the Static Mixer.

The kit also includes a misting head, for connection to a standard 1/2"ID garden hose, for water washing of raw bio diesel (after settling, cooling, and draining of glycerol has occured)

A 200 Micron, 20" Long Washable Monofiament Filter Bag is also included for when pouring WVO into the reactor, this prevents the ingress of large particle debris which could damage the pump

The kit is supplied with an outlet into which a 5 micron, 10" clear bowled filter is attached, from which a length of hose can then be connected to optional post-production purification equipment, such as an Ion Exchange Resin Tower, or Filter, or a simple Dispensing Nozzle (None of which are included with this kit but are optional extras - shown in picture 2)

PLEASE EMAIL US FOR A LINK TO THE FULL RANGE OF OPTIONS AVAILABLE WITH THIS KIT!

This Kit includes the following components:

1x 65 Litre Conical Tank
1x 0-120c Pipe Clamp Thermometer, with Stainless Steel Case (Not shown in picture)

1x 4-Head Misting Kit for 1/2"ID Garden Hose

1x 200 Micron, 20" Washable Monofilament Strainer Bag
1x Stainless Steel Immersion Heater, 18", 3kW, 230v
1x Immersion Heater Nut
1x Static Mixer, with 3/4"BSP threaded ends
3m Armorvin HNA, Steel Reinforced, Clear PVC Hose, 3/4"ID
1x Clarke TAM105 Pump, Silent Running, 230v

All Stainless & Polypropylene threaded fittings to assemble kit as shown in Image 1

7x Jubilee Clips, for 3/4" Hose

6x PTFE Tape

1x Tub of Heldite Sealant (48 hour cure)

Kit is supplied with main stanchon loosely screwed together for visual aid of how it should be assembled

To complete assembly, you will need a selection of tools, including an adjustable spanner, a 63mm hole saw, along with materials and equipment to build a stand for the tank itself. You will also need 16A rated power supply cable and switches to wire up and control the heating element and pump. We sell 16A immersion heater installation kits, as well as a run-dry protector unit, please enquire for details if these items are of interest.

Shown in the additional image below, are the various optional extras for purifying your finished bio diesel. We can supply all of these items too, please enquire for details and prices