|
◄◄◄ |
NO NEED TO WAIT!!!
CLICK LEFT PICTURE TO
BUY IT NOW!!! |
New Smart Dog In-Ground Pet Fencing
System
with 2 Collars
This
in-ground, invisible
fencing system is the most reliable,
humane & cost-efficient pet containment system
available today which help to keep your dog safe from rambling and traffic
without taking its freedom.
A radio transmitter connected into a power outlet will emit a radio signal along
an underground wire. When your dog approaches the boundary, the radio signal
will initiate the collar to issue the
warning beep first.
If your dog continues closer to the boundary, the system will issue a mild
shock. If your dog continues further, the system will issue stronger shocks
until your dog returns to within the boundary you have set up. Your dog will
naturally seek to avoid correction, and is content staying within the areas you
designated. Areas that you can created can be easily combined or deactivated at
your control.
This system is capable of
training your dogs as many as
you had and
enclosing up to 5
acres. This packing only
comes with 2 collars
and enough wire to enclose about a half acre (300m of wire). Additional collar
and wire for extent application can be bought from our shop.
SYSTEM
FEATURES:
-
Invisible & Intelligient Containment System
- The transmitter emits a harmless radio signal along the
underground wire to initiate the warning signals to the dog when it is
closer to the boundary.
- Flexible
Containment Design - The pet owner can build their
customized looping system based on their actual environment.
- Mutliple Dog
Training System - The fence system applies to
multi-dogs training at the same time. (Additional collar is required)
- Dangerous or
Protection Area Entry Prevention - The pet owner can
enclose the specific dangerous or protection area such as swimming pool and
make the dogs cannot entry-in.
-
Pulsed Proportional Stimulus
- The closer the distance between your pet & the boundary, the more intense
the static shock.
-
Progressive Tone Stimulus
- Gradual warning signals will be issued at different stages, i.e. a warning
tone will be issued first, then a shock stimulus if your dog continues to
move closer to the boundary.
-
Power Boost Switch
- The width of the warning can be adjusted by field width adjustment
knob in the transmitter.
-
Speed Detect Anti-Run Through
- The faster your dog is moving, the quicker the higher level of
intensity is issued. The collar automatically increases the stimulation
when your dog continues more than 1/3 of the way through the containment
field, regardless of the transmitter stimulation level setting.
-
Audio Wire Break Alarm
- The system's control center has an audible alarm to alert you if it senses
a break in the wire or if the boundary system is not functioning correctly.
-
Visual Wire Break Alarm
- The system's control center will light up if it senses a break in
the wire.
-
Quick Disconnect Terminals
- quick and secure connection or disconnection of the wire to the control
center.
COLLAR FEATURES:
- Sturdy nylon collar with length
adjustable from 30 to 55cm (approx. 12 to 22 inch)
for different size of dog (trainer can fit other collars with a width of 2
cm (0.75 inch)).
-
There are 2 sets of
selectable different-length metal screw rod (12mm +
18mm) which can ensure good conductivity of the static impulses which
can penetrate the different pet hair thickness . It is unnecessary to let
the discharging point touch the skin of the pet. therefore it is safe to the
pet.
-
The collar has
battery indicator
(LED) which can show the battery status, i.e. GREEN for working
properly, RED for battery replacement is necessary.
SETUP:
- Dig a
trench with 1"-3" depth and lay the
wire along the perimeter you chosen. The wire must be in a continuous loop
from the transmitter and back again.
Remarks: - DO NOT bury
the wire until you make sure that the system is running properly
-
Use gradual turn at
the corners with a minimum of 2.5 foot radius which can produce a more
consistent containment field.
-
Install the transmitter box on the wall and connect with the wire in a
complete loop.
- Turn on the
power source to check whether the wire loop is in good condition or not ("OK"
LED light means the loop system is complete and ready for use, "BREAK" LED
light means the loop system is incomplete and you should check the
connection and wire status again.)
- Insert
battery into the collar and put it on your dog.
- Train your dog by leading him around
the perimeter. Let him experience the warning beeps & shock so that he
knows his boundaries.
- Bury the wire after the system was
check in normal condition and then place the training flags with recommended
10' flag-flag interval and in dog's visual clue.
- Enjoy your FENCING SYSTEM.
Package Included:
- 1 x Indoor
wall-mounted transmitter
- 1 x US power
charger (Input: 100-240V AC 50-60Hz; Output: 12V DC)
-
2 x Adjustable receiver collar
- 1 x 6 Volt
(4LR44) battery for each collar
- 1 x boundary
wire of 300 meters
- 2 x extra
metal rod
- 20 x training
flags
- 1 x test bulb
- 4 x screws
- 1 x user's
manual
Important Notes: As Australia's policy prohibits the importation of collar with
SHOCK function, it is NOT recommended for buyers to purchase this item to
Australia district.
For
additional collar(s) or wire(s), please buy it from our shop or contact us for
details! |
Back to homepage
) 
makeitec
