Brand new model  Dry wash tower approx  50inch high 10inch wide or 250mm wide 1260mm high.   can be used with any of the dry wash media/resins. Volume of tower approx 70 litres.  This tower is constructed from  steel, no plastic parts.   Has a  stainless steel filter system.  There is a rod attached  to the base filter support  with a removable handle. This aids removal of media and fitting filter. Top bolts on with neoprene gasket.     This is also  easy to empty and refill filling point 250mm wide. Can be pump fed or gravity fed.  can be fed in either direction depending on your prferance but botton inlet recomended.    Free technical advice for all units purchased.  Tel warwick on 07884077777 with any questions or email me.   if not completely satisfied with this tower return it in good condition within 14 days for a full refund. inlet and outlet  are 3/4 bsp male thread. no fittings are supplied.  but fittings can be supplied at extra cost. you are welcome to pick up and pay on collection but you must tel to arrange.

dont compare this tower with the blue fibreglass towers .  because of there design have a slow flow rate ie small filter on the outlet riser tube. they also only have a small  filling point 100mm (ours its 250mm.) making it extremely difficult to fill and empty. the internal parts soon fail as they were made for filtering water.

media can be supplied see my other adds on ebay.  £50 discount if you order 60litre of amberpure resin with tower. postage to uk only. if northeren ireland or out side uk  please email for postage costs. 

you are welcome to pick up but you must telephone first