PROAIM 7000 REVERSE ARM dv vest flycam 6000 rig steady

PROAIM-7000 REVERSE ARM & DV OPERATOR VEST Camera Stabilizing System has specially been desinged with the High End Features at most affordable -price for use with Flycam 6000 Stabilizer. This Stabilization system is an ideal for video and film production. This is world’s most sophisticated and affordable Body Mounted Camera Stabilization System designed for Cameras weighing up to 15 kg.

PROAIM-7000 REVERSE ARM & VEST is an equipment made mechanically to fulfill the art of cinematography. It increases elegance of the moving shots and increases the quality of cinematography.

The mechanical system of a vest and articulating arm alleviates the physical stress that's otherwise placed upon you by manhandling a stabilizer on your own. If you've ever used a stabilizer, it's a great tool to have for walking shots, but even after a short time it becomes very tiring. The fatigue that's induced by carefully holding a stabilizer and camera at arm's length for extended periods will eventually impact your shooting in a negative way, because the more tired you become, the more attention you devote to that feeling of physical stress. A vest and arm system removes that problem, enabling you to simply "wear the system" and go all day long. With the PROAIM-7000 REVERSE ARM & DV OPERATOR VEST, one will be able to shoot longer and ‘fly’ more easily and more precisely than with anything else on the market. The REVERSE PROAIM-7000 ARM & DV OPERATOR VEST displaces the weight of the entire camcorder and stabilizer combination over the operator's body. It is light in weight, not overbuilt. PROAIM-7000 REVERSE ARM & DV OPERATOR VEST recommended for shooting commercials, industrials, weddings, documentaries, news, music video's or feature length motion pictures. It brings the fluidity and grace of professional, body mounted, camera stabilizers to your productions. This Stabilization System is designed to allow you to walk, run, go up and down stairs.

This system includes:-

• PROAIM-7000 Reverse Arm
• DV Operator Vest
• A Flycam 6000 stabilizer with lcd mounting adapter and battery mounting plate
• Tripod Stand
• Docking Bracket

The PROAIM-7000 REVERSE ARM & DV OPERATOR VEST incorporates advanced engineering and precision machining to make it lightweight, strong and most sophisticated system in it's price range. The arm is made of aluminum and consists of two segments connected together with a pivoting hinge, two joint hinges, 26 stainless steel bearings, high tension springs, An Arm Vest Connector Socket, and a gimbal connector. Each arm segment is a sort of parallelogram and a spring-shock-absorption-system enclosed inside.

PROAIM-7000 Reverse Arm has a capacity of lifting range upto 25" both arm section with a tool-free one-touch lift adjustment for each section.

\

l-key tool set in 3mm, 4mm and 5mm is provided to operate the system.

The High tension springs allow the PROAIM-7000 REVERSE ARM to handle a camera load upto 37 pounds. PROAIM-7000 REVERSE ARM's combined camera and sled carrying capacity ranges from 4 to 50 pounds. The articulated arm essentially acts as a shock absorber for the camera sled (Flycam 6000).

When the cameraman moves, the base of the arm moves as well. But the spring system in the rest of the arm responds to the weight of the sled. Instead of a sharp jolt, the camera shifts its position smoothly. When the body of the cameraman jerks, camera glides. The Support Arm can be setup and configured on either side so a left-handed, or a right-handed operator can use it smoothly.

The PROAIM-7000 Reverse Arm is the most versatile arm has ever been made.

This is a first-class arm. The Arm can be adjusted at any height according to the height of the person to get comfort. It gives smooth shots wihtout any jerkness even after changing the positions at the same time. The PROAIM -7000 Reverse Arm is not only stable, it is also an inherently graceful way to hold a camera –not only for big moves and running around, but also for those subtle, imperceptible and elegant displacements of the lens that cannot be achieved any other way.

FEATURES OF PROAIM-7000 REVERSE ARM

• PROAIM-7000 Reverse Arm has a capacity of lifting range upto 25" both arm section with a tool-free one-touch lift adjustment for each section.
• Exceptionally desinged system for standard and low mode video shots.
• PROAIM-7000 Reverse Arm boom range 25".
• Consists of high-tension springs to regulate weight of the camera.
• The Springs approaches the reverse position just with one-touch lift adjustment.
• The arm gives the smooth movements, comfort at any adjusted point.
• PROAIM-7000 Reverse Arm gives an excellent results of stablility while running, walking at any level of adjustment.
  
  

CONSTRUCTION :

• Aluminum Fabricated Body
• Powder Coated
• Consists of 26 Bearings
• High-tension sprigs made of high grade stainless steel
• Arn Gimbal Connector made of aluminum supported by stainless steel shaft
• Arm Vest Connector Socket made of stainless steel.
  
  

SPECIFICATION :

• Fast and easy to setup the arm at required position
• Sophisticated and Precision made aluminum Arm
• Load Capacity : 4 to 50 pounds
• Weight : 11 lbs
• Strong and elegant look

By using this knob, you can create a movement of the arm upto 25" from head to the waist.

ARM VEST CONNECTOR SOCKET : The socket tends the arm to be in a locked position as per the requirement of the cameraman.

Features of Socket :

• Made with High precision
• Made of Steel, aluminum & brass
• Steel spring

Therefore, the REVERSE PROAIM-7000 ARM is a boom in the camera Stabilization System world.

The PROAIM-7000 Reverse Arm is outfitted with a sophisticated professionally designed DV OPERATOR VEST. The DV Operator Vest can hold and evenly distribute the weight of the system across the operator's shoulders, back, and hips.

The padded vest has six attachment points for its suspension system. There are two snap-locks on the shoulder pads, two 26 inch long belts at the waist supporting pad and two 26 inch long belts at the center of the vest secured by velcro.

For safety, quick release snap locks and belts with quick release buckles allow the vest to be removed quickly.

FEATURS OF DV OPERATOR VEST

• The vest is fully padded.
• DV Vest uses self-locking aluminium snap-locks so you can tighten the vest really quick. snap-locks that makes you release the tension of the vest within seconds
• The straps themselves are made of though nylon and Velcro so they can be easily replaced or adjusted to suit individual operators.
• The lightweight and comfortable Supportive Vest can be adjusted to fit a wide range of operators.
• The PROAIM-7000 Reverse Arm is screwed right on to its socket, so you're not stuck with that thing banging around when you're taking a break between shots.

CHEST PLATE

Chest plate is all made of alluminum black anodizing. The Chest Plate is completely locked with stainless steel screws. The length of the chest plate can be adjusted according to the height of the person. There are three knob adjutments of the chest plate. Basically, you'll spend a few minutes the first time you put this thing on in order to get it comfortable. Once you've tightened all the straps and snap-locks, you shouldn't have to change anything (unless somebody else wears it). You need one-time adjustment for all. The Socket is made of steel.

SPECIFICATIONS :

• Smart, Comfortable, & Cushioned Vest Jacket
• Lightweight and comfortable
• High endurance
• Durable
• Easy Attachment and detachment with the Arm

Most hand-held shots suffer from a distinct jerkness. Undesired shocks of walking consist of two elements:

• Quick movement of the entire camera by a small amount, and
• rotation of the camera itself (tilt, pan, and roll).

Successful isolation will significantly reduce the size of both types of movement.

This is a really solid well built Stabilizer designed for PROAIM-7000 Reverse Arm & DV Operator Vest. Get it balanced properly and you can glide through shots with this Stabilization system. It is quick and easy to set up and balance. Allows unrestricted Booming and unrestricted 360 degree Panning. Comes with positionable weight discs that allow you to achieve dynamic balance.

A lighter gimbal with a more compact main bearing assembly and a new yoke design. Flycam 6000 is offset handle grip is attached to a free floating, precision Gimbal, which allows your hand to move up and down, and side to side, thereby isolating your hands unwanted motions from the camera.

Our steadicam features:-

• Universal Camera base plate
• Adjustable Gimbal
• Weight holding plate
• Weights for balancing your camera.

You can also mount the batteries of some other companies like Sony, Anton.

The Anton battery mounting plate in the following image is for demonstration purpose only.

You can also fix the weights downside of the weight plate.

FEATURES OF STABILIZER

GIMBAL SPECIFICATIONS :-

Gimbal has been designed to prevent angular deviations from causing the slightest disruption to your shot. The Gimbal occupy aluminum and stainless-steel construction and precision, flanged, extended-race ball bearings in all three axes, which yields higher payloads and superb angular isolation. This robust new, all-metal gimbal now permits your stabilizer to fly cameras weighing up to 17lbs

Your shots will tell the story. You'll shoot more telephoto, under more challenging conditions, than ever and your clients will be amazed. With this Ball Bearing Gimbal, this system can deliver superb results at twice the focal length as with the standard non-metallic gimbal.

1. Wheelbarrow bearing provides Rotational control over camera so the camera can be easily rotated on its axis.

2. Grip swavels left and right from the bolt. You can easily move whole steadicam up and down.

3. Angle bracket enables grip to move up and down.

UNIVERSAL CAMERA BASE PLATE WITH QUICK RELEASE CLAMP

The Camera Base plate has both 1/4" and 3/8" mounting slots (holes) to accommodate all variety of camera bases. You can slide your camera with base plate of steadicam on both the horizontal and vertical axes, achieved by means of thumbscrews and a movable camera base plate. This helps in setting the camera even more easily.

The quick release system uses a lever operated clamp. To mount the camera, you press the lever to lock open a cam-like lock. Now mount the camera to the plate with the help of screws provided. You then slide the plate into the clamp's front flanges and press it down in back to push down a pin that closes the cam to lock the plate into position.

You can slide a plate in only one end of the clamp and out the same (unidirectional). You can slide a long plate back and forth in the channel to adjust the camera-subject distance.

Gross balancing and composition adjustments can be achieved by sliding the plate within the jaws of the clamp with a movement range of up to 24mm.

Fine adjustment is made with the aluminum knobs; aluminum knobs delivers 1.25mm of travel per full revolution.

BALANCING THE CAMERA

The base of the stabilizing system is made up of heavy aluminum and steel rods that exerts weights. The aluminum weight plates have set on stainless steel. The weights are put into weight cups which are screwed onto the aluminum weight plates. Main function of these weights is to balance your camera on this stablizer.

You can hold lcd monitor at one side of the Flycam 6000.
The idea of holding screen at another side of post is that the eye does not touch the camera in order to transfer shock to video. Therefore, the searcher picture is transferred by means of a internal wiring (wiring is done from inside the post). There are slots in post for this very purpose) to the monitor so that person operating this system can walk or run without giving any shock to this system.

The monitor and battery mount is stronger easier to flip for low mode and has a wider range of positions, both vertically and horizontally.