Zalman ZM-2HC2 Hard Drive Heatpipe Cooler

Good value drive silencer offering vibrational noise reduction
Rubber mountings for damping and low frequency noise control
Innovative heatsink/heatpipe design gives excellent cooling
Compatible with all IDE/SATA/SCSI 3.5 drives (even 15,000 rpm)
Fits into a standard 5.25 (CDROM-sized) drive bay

New from Zalman, we are proud to present an unusual but very effective product which not only quietens your hard drive, but makes it run cooler too! The ZM2-HC2 builds on Zalman’s heatpipe technology first seen in their video card heatsinks, and now applied to the cooling of a hard drive.

The product consists of two aluminium bars which are screwed to the sides of a hard drive. Each bar is split in half and between each half are clamped eleven separate chrome-plated copper heat pipes, which link each side of the drive. As the drive gets hotter, heat is transferred to the liquid in the heatpipes, which vaporises and rises up the pipe where it cools, condenses, and runs back down to the drive again. This process ensures that heat is constantly being drawn away from the hard drive, much more effectively than any passive heatsink could manage.

The process is completely silent, and in addition to its cooling properties, the heatpipe cooler assists in reducing the noise of the hard drive through its rubber-damped drive mountings which ensure that vibrational noise from the drive is not transmitted into the chassis. This significantly cuts down on the “rumbling” and “clicking” noises which are very common in hard drives. Zalman’s heatpipe cooler can be used even with the fastest and hottest of hard drives, and will give both cooling and noise reduction benefits.

Specifications
Model Zalman ZM-2HC2
Weight 270g
Surface area 400 sq cm
Materials Aluminium, copper and rubber
Dimensions (L x W x H, mm) 143.5 x 146.5 x 36.5