XBOX 360 X CLAMP FIX KIT FOR 3 RED LIGHT PROBLEM

 THE ORIGINAL XCLAMP KIT  

WITH OVER 3000 HAPPY CUSTOMERS THE PROOF IS IN MY FEEDBACK THAT THIS KIT REALLY WORKS.

OTHERS ON EBAY SELL CHEAP PARTS MINE ARE TOP QUALITY BRITISH COMPONENTS

AND I AM THE ORIGINAL SELLER OF THIS CLAMP ! CHECK MY FEEDBACK FOR PROOF !

IF YOU ARE GETTING THE DREADED 3 RED LIGHTS ON YOUR CONSOLE THEN THIS KIT WILL FIX IT IN UNDER 20 MINS

Reasons why this X CLAMP KIT WORKS

When they designed the 360, they chose a slightly unusual way of mounting the
heat sinks to the processors. When the console is running, there is a tremendous
amount of heat build up inside the case. This causes the motherboard to flex against the
X-Clamp support plastic which in turn can causes the soldered joints on
the processors to come away from the motherboard itself.

This results in the Red Lights of Death !!!!!!!

Due to the inefficient design of the heat sink clamping method, this is a very large
problem. Although they haven’t (as of yet) come up with a decent design fix. On the
latest ‘Elite’ versions of the console they have used epoxy resin to ‘glue’ the corners of
the processors down to stop the flexing that causes this error  Whether
their fix will stand the test of time remains to be seen.

What the modification contained in  this kit achieves is to alleviate board flexing and
apply uniform pressure to the processors. This uniform pressure is enough to ‘remake’
the faulty joints re solder resulting in a working console. Also, because the pressure on the
processors is uniform the heat sinks do a much better job of dissipating the heat build
up.

The X-CLAMP kit i sell is tried and tested and contains the following parts

ALSO ALL FITTING INSTRUCTIONS WILL BE MAILED TO THE WINNING BIDDERS.

THE INSTRUCTIONS I PROVIDE GIVE YOU A STEP BY STEP GUIDE WHICH COVERS THE FOLLOWING.

HOW TO OPEN YOUR 360 SAFELY,

HOW TO FIT THE X CLAMP KIT.

+ A VIDEO SHOWING THE KIT BEING FITTED

I ALSO PROVIDE YOU WITH MY TELEPHONE  NUMBER TO RING IF YOU GET STUCK !