Victorian reproduction tiles - Corner Border sections

Easy installation - Exact positioning - easy adjustment - rapid coverage of area

We are now supplying our range of Victorian Mosaic on sheets.

This system is often used when applying mosaic to floors and walls. The common method employed by most manufacturers is to glue a fibre mesh to the underside of the tile.

Our system uses a face mounted adhesive film with excellent strength characteristics. This film is strong enough to hold the tiles in place for transit and installation, yet is designed to release after installation without leaving adhesive residue on the tiles.

Points to conder

1.The film is very hard to tear or stretch but can be easily cut with a craft knife for minor adjustments.

2.The film is transparent allowing the installer to view the design. The adhesive is water resistant, so no adhesion is lost due to    accidental exposure to water.  

3.The film is mounted on the face of the tiles allowing 100% contact of the back of the tile to the mortar.

4.Full contact with the face of the tile means it has self levelling properties, eliminating minor discrepancies in tile thickness.

5.Approximately 1 square foot of tiles are laid in one application.

6.Ensures accurate straight alignment, minimal grout lines (approx 1 - 1.5 mm) resulting in a crisp clean finish.

7.When the tiles have been fixed and set, the clear film is simply peeled off, leaving no residue on the surface of the tile.

8.These sheets are not available anywhere else, as this service is exclusive to our company. We have been restoring and installing Victorian tiles for over 10 years and have developed this system to speed up installation and ensure accuracy. In our time we have seen many poor installations by inexperienced tilers. This is largley due to the requirement of laying such designs  tile by tile.

Please see our other sheeted items in order to create your perfect design.

Please also see our website gallery with more information about this service - http://www.londonmosaicrestoration.co.uk/gallery.php?id=25

Please also see here an example of what is possible when using our sheeted tiles - http://www.londonmosaicrestoration.co.uk/gallery.php?id=28

Technical specifications

Tiles per sheet - 8, 4 x sheets

Size of sheet -

Dimension of tile - 50mm black squares, 35mm x 35mm x 50mm White triangles, 50mm x 50mm x 70mm white triangles

Edges of tile - Square as per the original Victorian tiles.

Sheet - Clear film with Adhesive attached to face of tile.

Reverse of tile - Slightly rough to ensure good adhesion.

What you will require for an installation

Field sections - Border sections - Corner sections - Triangles or Half sheets - Inner strips - outer tiles (for extremity)

Please see our other listings or visit our website for more info.

Cut along the dotted line to release the sections