Passing a compressed and heated intake charge through an intercooler reduces its temperature (due to heat rejection) and pressure (due to flow restriction of fins). The net result is an increase in air density. This increases system performance by recovering some losses of the inefficient compression process by rejecting heat to the atmosphere.
Intercoolers that exchange their heat directly with the atmosphere are designed to be mounted in areas with maximum air flow, this kit has been designed around that.
How do i fit it? What does the kit come with?
The kit comes with everything needed:
1 x Large intercooler (690mm length core to core, 590mm base length 65mm wide)
7 x 57mm 90 degree elbow air intake pipes
12 x samco type connecters in red,blue or black available
2 x Straight air intake pipes
22 x jubilee clips
2 x marine spec clamps for the connection to the top of the inlet (extra strong so the pipe will not pop off under boost)
WILL IT FIT MY VAN?
This kit has been designed for the 2.5 tdi 88bhp or the 102bhp which is engine codes acv or ajt.
This kit can be fitted in the lower bumper of an aftermarket bumper
Or the intercooler can be fitted into the standard bumper, but you will need to cut a hole out of the lower bumper so you can get the full benefits of this kit.
It screws through the the top of the inner bumper by cutting out small lugs. Which the bolts then clamp on to. Its not hard to fit it.
everything you need to intercool your t4 is included in the sale.
This kit is fitted to my own van and works well giving better throttle response with less turbo lag and looks really different to other vans.
It sounds like a lot of hard work with all the parts involved, but its pretty easy. The 90 degree pipes will require cutting to fit. And some cutting of the bumper will also be needed depending which front bumper you have.
If you have any qusetions regarding fitting the kit please email me:
willroberts205@hotmail.com
or call:
07928855681