VW GOLF CORRADO VENTO VR6 13 ROW ENGINE OIL COOLER KIT on eBay, also, Volkswagen, Car Parts, Cars, Parts Vehicles (end time 17-May-08 17:23:51 BST)

VW VR6 13 ROW OIL COOLER KIT

SUITABLE FOR:

GOLF VR6

CORRADO VR6

VENTO VR6

Later engines with plastic heat exchanger caps will require a replacement alloy cap - £14.99extra

OIL COOLER KITS AVAILABLE FOR ALL MAKES & MODELS - PLEASE SEE MY SHOP ITEMS

This is a brand new 13row oil cooler kit designed by vw motorsport for the Vento VR6 Cup race formula. Designed to fit in place of the stock heat exchanger.

KIT INCLUDES:

13 row x 235mm oil cooler
2x 1/2bsp hose and fittings
take off sandwich plate
elongated centre bolt
universal mounting brackets
8x nuts/bolts

Matrix dimensions: 235x100mm

For road use a 13 row cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required.

(16row cooler - £6.99 extra)

FOR TRACK USE GO UP A SIZE

Exact cooler size required depends upon: the type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump.

If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling.

The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still.

Roughly speaking you need about 10psi of oil pressure per 1000rpm.

e.g. 7000rpm requires 70psi oil pressure

If the pump cannot meet this demand when the oil is hot/thin engine failure will result - usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block!

This is especially important on part worn engines - a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isnt over revved or over heated there is no reason for failure.

For track, competition or high preformance use a rough target temperature for the oil is around 100degrees C. Over 100C the oil thins out rapidly and therefore drops the pressure.

TURBO SYSTEMS WILL ROCKET THE OIL TEMPERATURE.

In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate - £19.99 extra.

This oil cooler kit is designed for motorsport use. NO instuctions are included. (some fitting tips & tightening torques are included)

PLEASE VIEW MY SHOP ITEMS

SAVE ON POSTAGE

Postage on multiple items(purchased/sent together) can usually be reduced.

Please purchase the items & request total BEFORE payment is made - a combined postage invoice will then be sent.

Postage reductions will only be accepted if invoiced by Matt Lewis Racing.

PIC IS A SAMPLE KIT - NOT THE ACTUAL KIT

Postage and packaging

Service

£11.99

United Kingdom

Seller's Standard Rate

CONDITIONS FOR RETURN: ITEMS FOR RETURN MUST BE AUTHORISED IN ADVANCE. POSTAGE IS NOT REFUNDABLE. RETURNED ITEMS/PACKAGING MUST BE IN AS NEW CONDITION. A HANDLING CHARGE MAY APPLY TO SOME ITEMS. TO AVOID NEEDLESS MISTAKES MAKE SURE YOU HAVE AN UNDERSTANDING OF WHAT YOU ARE BUYING AND WHAT PARTS FOR YOUR MODEL LOOK LIKE BEFORE PURCHASE. UNIVERSAL FITMENT - MEANS NOT DESIGNED FOR ANY ONE PARTICULAR MODEL. WHERE SIZES/SPECS ARE GIVEN PLEASE MAKE SURE THESE ARE SUITABLE FOR YOUR MODEL BEFORE PURCHASE. DO NOT ASSUME/GUESS CHEAPER PARTS WILL FIT MODELS THEY ARE NOT LISTED FOR. IF YOU ARE IN ANY DOUBT DO NOT BUY. PLEASE READ & UNDERSTAND LISTINGS FULLY. MODEL SPECIFIC ITEMS - WHERE MODEL INFO IS REQUESTED STATE EXACT MODEL & YEAR ON PAYMENT. WHERE UPGRADES/VARIATIONS FROM THE STANDARD ITEM ARE OFFERED REQUEST TOTAL & STATE ON PAYMENT. DO NOT ASSUME BRAND NEW MASS PRODUCED ITEMS ARE FAULTY IF PROBLEMS ARE ENCOUNTERED - SEEK PROFESSIONAL HELP/ADVICE - 99.9% OF PROBLEMS ARE DUE TO FITTING/OUTSIDE ERRORS. FOLLOW FITTING INSTRUCTIONS(WHERE SUPPLIED) - FUEL PUMPS MUST BE PRE-FILTERED ETC. MOST ITEMS SOLD ARE DESIGNED FOR PROFESSIONAL/MOTORSPORT USE, TO BE FITTED BY EXPERIENCED/QUALIFIED ENGINEERS - DO NOT ATTEMPT TO FIT THESE PARTS IF YOU DON'T HAVE THE SKILLS OR EXPERIENCE. OBSERVE ALL SAFETY PRECAUTIONS/SAFE WORKING PRACTICES. I STRONGLY ADVISE ANY ITEMS RETURNED ARE SENT RECORDED DELIVERY - DO NOT SEND HIGH VALUE ITEMS UNRECORDED/UNINSURED.

ALL SALES ARE FINAL AND NON RETURNABLE. OVERSEAS BUYERS MUST PAY BY PAYPAL AND CONTACT ME FIRST FOR A SHIPPING QUOTE. PRICE QUOTED IS FOR UK MAINLAND ONLY. PLEASE ALLOW 7 DAYS FOR DELIVERY(UK). THIS ITEM WILL NEED TO BE SIGNED FOR UPON DELIVERY. PAYPAL PAYMENTS - ITEMS CAN ONLY BE SENT TO YOUR REGISTERED PAYPAL ADDRESS - PLEASE ENSURE THIS IS COMPLETE AND CORRECT.

VW GOLF CORRADO VENTO VR6 13 ROW ENGINE OIL COOLER KIT

Cooling, AC & Heating

Modification/ Enhancement

Oil Cooler

New

Volkswagen

Corrado, Vento