Underfloor Heating Insulation Boards 50 Pack 6mm

THERM-A-MAT INSULATION

50 Board Pack

6mm Boards 1200 x 600mm

Energy Efficient and Cost Effective

FREE PHONE HELP/SUPPORT LINE

50 Boards = 36.6m2

0800 917 0667

Email Support jen@heatingmats.co.uk

FREE DELIVERY FREE DELIVERY

Therm-a-mat insulation boards have been especially created to produce a high thermal barrier between the subfloor and floor covering.  This can be used with any floor heating system it can greatly reduce heat loss and therefore save more on your heating bills.

Therm-a-mat Insulation boards are all in compliance with BS EN ISO 9001:2001 and certified by BBA Certificate 04/4186. 

Therm-a-mat insulation also also also complies with BS EN 13164:2001.

FEATURES

High thermal capacity (retains heat)

Easy and safe to use

Easy to cut with stanley knife /fine saw

Resistant to tile cement, building cement and most other building compounds.

Water and damp proof

High Compression weight (35 tonnes which is british compliance)

Energy efficient and enviromentally friendly

CAN BE USED WITH

All electric and water floor heating systems

On top of concrete and timber sub floors

Under all ceramic, stone, slate and porcelain floors

Under wood and laminate floors

OR  CALL FREEPHONE 0800 917 0667 

WHERE OUR  TEAM WILL BE ABLE TO HELP YOU.

Technical Data for Therm-a-mat Boards

U-value requirement for floors

Approved Documents L1 & L2 2002 England & Wales)

Technical Standard J 2002 (Scotland)

Insulation thickness (mm) required for U-value 0.25 W/m².K

(calculated to BS EN ISO 13370:1998 and BS EN 13162:2001)

P/A: Ground bearing floor – concrete slab (screed and cement depth 65mm)

0.10 0.15  0.20  0.25  0.30  0.40  0.50  0.60  0.70  0.80  0.90  1.00

- 25             30     40    50      60    70     80     80     80     90     90

P/A:  Suspended floor – block and beam (screed sand cement depth 65mm)

0.10    0.15  0.20  0.25  0.30  0.40  0.50  0.60  0.70  0.80  0.90  1.00

-  25            40      50   50     60       70    70     70     80     80    80

P = exposed perimeter (m)            A = floor area (m²

Properties                               Standard                     Unit            Therm-A-Mat

Thermal conductivity                 BS EN 13164              W/m K            

Declared (¹)

30-70mm                                                                                             0.029

71 – 120                                                                                              0.030

Decalred (²)                              BS EN 13164              W/m K

</= 50 mm                                                                                           0.028

10˚C/60 days                           BS EN 12667              W/m K            

All thickness                             /BS EN 12939                                     0.027

Mechanical properties

Compressive strength  -            BS EN 826                  kPa                  300

Vertical @ 10% or break

(90 days)                                 

Design compressive strength BS EN 1606                    kPa                  110

2% max deflection (50 years)

Compressive modulus               BS EN 826                  MPa                 12

Tensile strength             BS EN 1607                MPa                 0.5

Tensile modulus                        BS EN 1607                kPa                  12

Shear strength                           BS EN 12090              kPa                  250

Shear modulus                          BS EN 12090              MPa                 8

Water absorption by immersion (28 days)

                                                BS EN 12087              Vol%               1.5 max

Water vapour diffusion resistance factor

                                                BS EN 12086              μ                      100

Dimensional stability

48 hours at 70◦C&90% RH     BS EN 1605                %                     2 max

168 hours at 40 kPa & 70◦C    BS EN 1605                %                     5 max

Dimensions:thickness,width,length                           mm                   on request

Dimension tolerances (³)

Thickness                                 BS EN 823                  mm                   -0.5 to+0.5

Width <700mm                        BS EN 822                  mm                   0 to + 3

          >/=700                           BS EN 822                  mm                   0 to + 5

Length                                      BS EN 822                  mm                   0 to +10

Edge profile                            -                                   -                       butt

Surface finish                         -                                   -                       planed

Density                                   BS EN 1602                kg/m³               35

Coefficient of linear expansion

                                                BS 4370:Method 13     mm/m-K          0.07

Temperature limits                -                                   ◦C                    -50/+75

Reaction to fire                      BS EN 13501              EUROCLASS   E

Note

The properties given above are typical unless stated otherwise.

1.                  Diffusion open

2.                  Diffusion tight facings

3.                  Products with special dimensions or closer tolerances may be available on request.

Therm-a-mat Insulation boards are all in compliance with BS EN ISO 9001:2001 and certified by BBA Certificate 04/4186. 

Therm-a-mat insulation also also also complies with BS EN 13164:2001.

FEATURES

High thermal capacity (retains heat)

Easy and safe to use

Easy to cut with stanley knife /fine saw

Resistant to tile cement, building cement and most other building compounds.

Water and damp proof

High Compression weight (35 tonnes which is british compliance)

Energy efficient and enviromentally friendly

CAN BE USED WITH

All electric and water floor heating systems

On top of concrete and timber sub floors

Under all ceramic, stone, slate and porcelain floors

Under wood and laminate floors

OR  CALL FREEPHONE CUSTOMER SUPPORT 0800 917 0667 

WHERE OUR  TEAM WILL BE ABLE TO HELP YOU.