USB Cable #505 #507 for Meade Autostar 497/5 or II

This cable comes with USB adapter!

Cable #505 / #507 allowing connection of Autostar #495 or #497 handpanel to USB port.

Supports both Vista and WinXP.

USB 1.1 and 2.0 compliant.

Plug-n-Play installtion. No manual setup required.

Every USB cable will be tested live on my own LX200GPS before sending to you.

100% compatibility guaranty or your money back.

Since there are thousands of cheap but not so cheerful USB adapters around it took me a while to come up with the one which DOES NOT FAIL. Hence the price and the guaranty to work.

Will post updated picture asap.

---------------------------------------------------------------------------------------------------------------------

Serial cable for updating Autostar 497  and 495 from PC. Connects PC USB-port to Meade scope via 7ft long cable.

Will work with all Meade scopes using Autostar 497 or 495 - all ETX series, LXD55 and 75 and all LX90 ACF.

Same applies to #507 cable with diference that is conects only Autostar II from LX200 ACF range.

Now complete with Astro software which will allow user to easily identify astro objects in real time and basic control of your scope.

Cable included with this listing is some 2mtr (7ft long) . Any other length upto 20mtr (60ft) available at £0.50 per extra 1 meter (3ft) of length. Just add to total during check-out.

Please note using PC connection cable in lengths more than 20mtr (60ft) is not advisable due high risk of interferences and signal loss.

ATTENTION Autostar 494 owners - this cable will not work with AS 494!