Pair of Trammel Points

Reduced to clear, only a few left

Used to lay out and mark large circles, arcs, points, or to measure the distance between points that are too great to be reached with dividers.  Attach trammel heads to piece of timber or metal of any length 3/4" - 1 1/4"  thick (approx) one trammel point will hold a pencil (as illustrated)

The Pencil or length of wood are not included!

• Hardened Steel Scribing Points

Please check out our 100% feedback and our Ebay Shop as we have other items listed that may be of interest

6 inch Steel Depth Gauge

Marked in both Metric and Imperial (opposite sides on the blade

•  Metric markings by 1/2mm
• Fractional markings by 64th 

Please check out our 100% feedback and our Ebay Shop as we have other items listed that may be of interest

Made from Carbon Steel, so they are easier to sharpen and reprofile than old tool steel scrapers

Designed for removing, cleaning, smoothing or flattening off high spots, burrs and rust from machined surfaces where there must be a good clean and true fit, like Exhaust flanges, Thermostat housings, Water pumps as well as pressurised gas, oil and water seals. Also useful to deburr holes, smooth edges and remove underseal, paint and adhesives from Metal, Fibreglass, Plastic or Glass surfaces. 

•  Flat 17mm ( 5/8^th ) width:  General purpose scraper, designed for removing minute amounts of metal from surfaces and useful to remove bits of old gaskets and sealants. 
  
• Bearing; Slight curve profile scraper and mainly used for bearings.
• Three corner scraper (or Triangular Point ). A useful multipurpose scraper, typically used to deburr holes and used on the internal surface of bush type bearings.

• 100mm (4 inch) blades with an overall length of 200mm (8 inch)  (approx size)

Box set of

50 Large head Diamond Burrs

3.2mm (1/8th) shaft

Ideal for Dremel, Rotary Craft tools & Cordless Drills

The set has an excellent selection of large diamond burrs up to 16mm (5/8th) in diameter

Less than half price

50pc assorted shapes and sizes diamond burr and wheel set for detail work. Ideal for Jewellery, Model and Craft work. Use to remove burrs on glass, metal, stone, wood, ceramics, fiberglass and plastic. Each has a 3.2mm (1/8'')  shank. Ideal for Dremel and other craft tools

6" Triple stitched Buffing Wheel  
General purpose 90 layer, triple stitched cotton buffing wheel for polishing. Suitable for all metals, plastics and Jewellery etc and suitable for use with all polishing compounds, the multi stitching holds the cotton plys together tighter so that greater pressure can be applied. We also have a 6" loose leaf buffing wheel available which can be supplied instead of the triple buffing wheel if required (no extra charge)

Right side; Tapered Nose (Pig's Tail) to convert your Bench Grinder into a Buffing / Polishing Machine.  Fits over a standard 1/2 " shaft of your bench grinder or motor (simply tighten up the screws to fix in place on the shaft) the Buffing wheel then screws directly onto tapered thread. The kit comes with a Right hand tapered nose, but if you would like a Left side instead of a right then please let us know and we will change it (no extra charge) Patterns of tapered noses may vary from illustration due to manufacturers modifications.

      General purpose buffing wax.  Brown / Tripoli compound:
      A general purpose buffing and polishing wax, for non-ferrous metals such as, Brass, Copper, Aluminum, Gold and Silver also     suitable for wood cellulose acetate, phenol-urea and melamine-formaldehyde resins and most other plastics. We can supply White, Green, Rouge buffing wax, Beeswax or Carnauba Wax instead of the Brown wax if requested (no extra charge)