This item has been added to My eBay for Guests. As a guest, you can: Track up to 10 items on this computer in My eBay Receive an email reminder for this item a few hours before it ends
Replacement Drive Belt For The Linn Range Of Turntables - Brand New
The analogue turntable is a device designed to spin a vinyl record at a constant speed and permit the tonearm/phono cartridge system to "read" and report changes in the record grooves with minimal interference. It provides listening pleasure that has yet to be fully realized by the compact disc, digital video disc, and digital technology. This is the reason why its use continues today despite its exaggerated demise.
Features & Benefits:
Pitch accuracy goes out the window when your belt stretches or wears. Return your Linn to its correct pitch with a new belt.
When should I replace my turntable drive belt?
Usually 3-5 years seems to be the average. Belts stretch with time. A belts worse enemy is being idle. Run the turntable occasionally if you don't play records regularly. Also, check for signs of slow starting. This is usually caused by belt slip (the result of stretching). A belt stretched >5% over its new length should be replaced.
Fits models:
Linn Sondek LP12
Linn Basik
Linn Axis
These are not made by Linn but are of the same specification and quality.
Also fits the following turntables:
Ariston Q-Deck
BSR 200
BSR XL-1400
Dual 1237
Dual CS-504
Hitachi HT-1
J C Penney 5700
Magnavox AH-197M37
Magnavox AS305M
Magnavox AS-9418
Magnavox AS-95163701
Magnavox AS-95173701
Mitsubishi LT-10V
Philips 1735
Philips 1735
Philips AS-9516
Philips AS-9517
Philips TS-5961
Pioneer PL-210
Pioneer PL-211AZ
Pioneer PL-44F
Pioneer PL-570
Pioneer PL-X100
Pioneer PL-X20Z
Pioneer PL-X21K
Samsung SM-3237
Sony PS-FL77
Sony PS-LX500
Soundesign 6821
Soundesign 6822-B-1
Soundesign 6822-B-A
Soundesign 6822-B-B
Soundesign 6822-B-C
Soundesign 6822-B-D
Soundesign 6822-B-E
Soundesign 6822-B-F
Soundesign 6822-B-G
Soundesign 6822-B-H
Soundesign 6822-B-H(3)
Sylvania TH-179S37
Sylvania TS-9611701
Technics SL-B303
Thorens TD-160-C
Thorens TD-2001
Thorens TD-280 Mk II
Thorens TD-280 Mk III
Thorens TD-318
Thorens TD-318 Mk II
Thorens TD-318 Mk III
Thorens TD-320 Mk III
Thorens TD-321
Thorens TD-520
Westinghouse ST-58WA70
York M-2202
York M-2202A
York M-2203P
Zenith 169-195
Zenith 169-228
Replacing a turntable drive belt is usually a relatively painless process and can usually be accomplished by performing the following steps.
Remove the turntable mat
Take off the platter, sometimes there will be a circlip holding the platter in place and if this is the case it will need to be removed first. Most platters just lift off however.
Turn the Platter upside down and you will normally see an extrusion where the belt goes round. If there isn't one and the platter has lifted off and left the belt in place then it will be obvious where the belt has to go! If this is the case then simply replace the belt and refit the platter. Now go to step 7. If however there is an extrusion on the underside of the platter then proceed to step 4.
Place the belt around the extrusion on the underside of the platter
Replace the platter.
Grasp the belt through one of the holes in the platter and stretch it over the motor pulley. If there is a mechanical speed change guide you must make sure that the belt goes through this otherwise you will not be able to change speed.
Replace the mat.
Enjoy your vinyl!!
Also Available in my ebay shop 'Microphonics' as Buy it Now items, both singly and in packs of 2 to save you time and money.
Payment may be by Personal cheque, Postal orders or Paypal.
PayPal—eBay's service to make fast, easy and secure payments for your eBay purchases.
Overseas Customers Must Pay By Paypal
Thanks for looking and good luck if you decide to bid.
Save up to £0.50 on postage when you buy additional items from microphonics!
Dispatches to
Worldwide
*Sellers are not responsible for delivery time. This information is provided by the carrier and excludes weekends and bank holidays. Note that delivery times may vary, particularly during peak periods.
Postal insurance
Included (in the postage & packaging cost)
Return policy
Item must be returned within:
7 Days of receipt
Return policy details:
We offer a 'no quibble' returns and refund policy as long as the goods are returned to us within 7 days of receipt.
Fast payment leads to a smooth transaction. Payment must be received within 7 days or the item will be re-listed and negative feedback left. Please note that we can only accept payment from overseas customer via Paypal. We do not accept personal cheques or postal orders in Euro's, US Dollars or any currency other than UK Pounds. Please note that we have no trade counter and collection of items is not possible.
TURNTABLE DRIVE BELT - FITS ALL LINN TURNTABLES on eBay, also Turntable Parts Accessories, Turntables, Home Audio Hi Fi, Consumer Electronics (end time 17-May-08 20:30:00 BST) Check if TURNTABLE DRIVE BELT - FITS ALL LINN TURNTABLES is for sale as immediate purchase or as an auction item, and use PayPal for free protection on your purchases.
Track up to 10 items on this computer in 
)
