This product has gone under new revision, with more power output.

This pump is the first pump worldwide, which can be installed in mass-produced water-cooled workstations, and it is ideally suitable for the water cooling of processors and electronic components. Due to its size and output, a multitude of applications are available. This pump is an electronically commuted ball-motor pump, with running times of more than 50.000 hours at 12 V. The only flexible part of a ball-motor pump is a sphere-formed rotor-/runner unit, which is propped up against an extremely hard, wear-resistant ceramics bearing ball. A conventional axle with journal bearing and shaft sealing is not available. The spherical bearing of the rotor-/runner unit on the ceramics bearing ball provides a lot of advantages: a development of the bearing play – and thus a noise increase - is theoretically not possible. The pump is silent over the whole running time.

The bearing is self-adjusting. It is lubricated directly by the delivery medium (wet-running pump). There is basically no need for maintenance. Since the rotor is always held magnetically in the intended position, smaller dirt particles are no problem. Blocking of the pump is not possible under normal conditions. Even after lengthy downtimes a safe approach is given. The permanent magnetic rotor/ runner unit is propelled by a magnetic field, which is produced by the surrounding stator. This is built entirely around the rotor. The entire pump is thus with 38 mm only a little higher than the stator itself. It easily fits into all conventional PC, Barebone and Mini PC cases. A separate magnetic shielding is not necessary under normal conditions. Normally, a separate magnetic shielding is not necessary. The ball motor principle enables an economical enterprise with comparatively high achievements. The tension variation can easily regulate the DDC direct current pump over a large capacity range. All medium-affecting parts are completely corrosion resistant.

Technical data:

Dimensions: (WxLxH) 62x62x38mm (without connections)
Motor construction type: electronically commuted ball-motor
Working voltage: 12 V DC Voltage
Power input: 18W
Admissible voltage area: 6 to 13,2 V
Delivery height: at 12V: 4,7m
Max. delivery rate: 600L/h
Delivery media: water, water-/glycol compounds
Max. system temperature: 60° C
Medium-affecting parts: stainless steel 1.4571, PPS-GF40, EPDM O-sealing rings, alumina, hard carbon
Connections: 2x 3/8" hose connection

 

All orders are shipped within 24 hours if the item is in stock. Postage methods are
Royal Mail Recorded
Royal Mail Special Delivery
Courier Service.

Regular shipping times may vary based on stock and can take up to 72 hours to be filled.Tracking Numbers are provided on despatch via email. to let you know that your order is "On its way!" . Remember that the cost of postage also covers packing as well. We dont just box shift, we take our time to ensure proper packing sales@watercooled-pcs.co.uk

• Royal Mail Recorded Delivery - 1-2 Days
• Royal Mail 1st Class - 1-2 Working days
• Royal Mail 2nd Class Recorded Delivery -2-3 Days
• Royal Mail International "Signed For" - 5-7 Working days

Please Note :- Delivery times are to be used as a guide and may take longer.

We accept the following payments through our eBay Store:

PayPal  www.paypal.com
Bankers Draft
Cheque
Postal Order

Post Office counter paments
Payment in Person

We also accept over the counter payment through any Post Office . Please e-mail sales@watercooled-pcs.co.uk prior to purchase for banking details.

If sending payment by Postal Order we strongly advise you send a royal mail recorded delivery. Watercooled-pcs will not be held liable for lost payments. If using this method of payment please enclose a separate piece of paper with your item number, full name, and address clearly printed.

Please allow 5-7 days for cheque payments to clear before we dispatch your item.

Pay instantly with your debit or credit card through PayPal.

Watercooled-pcs guarantees our items not defective upon arrival. If your product arrives damaged please contact us immediately as this is a matter that will need to be taken up with the delivery service. However, in the case that your item arrives and is defective, please ensure that all parts, packaging, etc. are returned along with the item(s) within 7-10 days. Upon receiving a defective item contact sales@watercooled-pcs.co.uk immediately so we may record your return.

Please ensure the product(s) is well packed and in the same condition in which it arrived. Items lost in return transit are the sole responsibility of the sender, so please utilize adequate postage services and tracking facilities. Our preferred vender is Royal Mail Recorded Delivery.

Please note, if we determine that the returned item is in working order, i.e. not defective, a 10% restocking fee will be charged. Please check our terms for further details regarding restocking fee assignment. Items returned within 7 days of receipt, returned unopened and in their original condition will receive a 100% refund as denoted by general UK law.

Customers are responsible for return shipping costs.

We're here to help! If you have any questions regarding this item please utilize the contact seller form. If you need help or have inquiries about proper installation of your purchase please use our contact us link and we will be happy to show you.

For all other inquiries please contact sales@watercooled-pcs.co.uk or use Skype! and talk to us live. If a representative is unavailable, please feel free to leave a message and include your phone number if you would like us to call back.

Skype: watercooledpcs
Phone: +44 020 7617 7805
E-mail: sales@watercooled-pcs.co.uk

SquareTrade © AP6.0