The Manson SPS-9620 DC switch mode power supply has been designed for professional applications which require quality high current for equipment such as high power car audio which is normally operated from 12V batteries.
Suitable also for high power shack applications and I am so glad I don't live next door to you !

The output is current limited at just over 120A and this current output can be supplied continuously. The output voltage has Over Voltage Protection at about 17V to ensure very high protection against power supply failure thus offering full protection to the powered equipment.

The excellent load regulation is further enhanced with remote sensing terminals to give precise voltage at the point of application for long connecting leads. The output voltage range can be easily fine tuned between 12.6V - 14.3V via a concealed trimmer. This covers most 12V battery sources such as six leads - acid cells ( 13.8V ) or ten nickel-cadmium cells ( 12.6V ) and etc.

The excellent Dynamic Power Factor Correction ( > 0.9 ) reduces unnecessary power loss (cuts electricity cost in some countries), and cuts the noise and EMI to your power mains.


Main Features ;

    *  Output Over Voltage Protection at 16.5V Trimmer fine tune output voltage 12.6 to 14.3V for 13.8V nominal.
    * Constant Current Limiting Overload Protection Short Circuit and Over Temperature Protection.
    * Green LED for power on/off indication.
    * Red LED for overload / short circuit protection.
    * Excellent line and load regulation.
    * Remote sensing terminal for precise voltage load with long leads.
    * Low ripple and noise.
    * Cooling fan is on all the time, speed of fan increases with temperature of unit.
    * High efficiency 85%.
    * CE Approval: EN-55022, EN-610000, EN-55024, IEC 60950:1999+Corr.Jan.2000, EN 60950:Corr.Feb.2002
    * Light weight and Compact: 11 Kg., 23 W x 22 H x 34 D (cm)

The heavy duty binding post terminals are rear mounted, the SPS 9620 is supplied with user instructions,
For further product information on this model please call 01636 676898.


FACTORY SPECIFICATIONS

Output Voltage	Fixed 13.8 VDC (Fine Tune 12.6 - 14.3 VDC)
Rated Output Current	120A
Ripple and Noise	40mV p-p
Load Regulation (with sense)	0.1% + 5mV
Load Regulation (with no sense)	0.1% + 5mV
Line Regulation	0.05% + 3mV
Input Voltage	230VAC / 50Hz (or on request)
Efficiency	> 85%
Dynamic Power Factor Correction	> 0.97 at optimal load
Indicator	Green LED for power on/off indication, Red LED for overload/short circuit indication
Special Feature	Remote Sensing
Cooling Method	Variable Speed thermal static control fan
Operating Temperature	0 - 40°C
Protections	Overload (Constant Current Limiting), Short Circuit, Over Temperature and OVP
Approvals	CE : EN 60950 , EN 55022
Dimension ( W x H x D )	235 x 218 x 345 mm
Weight	11 Kg