SCM Sandya 5srcs twin wide belt 1350

Roller roller/pad configurationSTANDARD EQUIPMENT* control panel * powered adjustment of working thickness* digital readout of working thickness* natural rubber feed belt* automatic device for feed belt tracking and tensioning* floating rubber-coated pressure rollers in the front/rear side of the operating groups* infeed flexible steel pressure plate on first operating group* N.2 infeed support rollers and n.2 outfeed support rollers on the feed belt* electronic oscillating of sanding belts* dust extraction outlets with a shape which assures a low air consumption * "Hand-safety" emergency device in the infeed panel area* front and rear emergency pushbutton* padlockable main switch* automatic star-delta start of the main motor* overload protection on main motor* automatic brake for rapid shutdown of operating groups* automatic emergency stop machine for: - sanding belt breaking - non-tensioned sanding belt - lateral outplacement of sanding belt - absence of compressed air - overload on main motors* motors in isolation class IP54TECHNICAL FEATURES: - working width 1350mm- min./max. working thickness 4 - 170mm- sanding belt width 1350mm- sanding belt length 2150mm- main motor power 25hp- feed belt motor power 1.1hp- feed belt speed 4.5 - 9m/min05.11.26 5/S RCS 135 *Automatic Wide Belt SanderFirst unit "R" equipped with:--R/140' roller 140mm diameter-85 SH Rubber coated roller-Manual adjustment of working height*second combined unit "CS" equipped with:-CR/140 Roller 140mm diameter-45 SH rubber coated roller-manual adjustment of working height-TRP/A flat stiff pad made of an extractable bar with felt contact insert density D=0.68mm-manual adjustment of working height-screwed graphite cloth10.90.87 European safety regulations (ce norms)Anti-kickback workpieces safety device is included31.21.60 " RA" Helicoidal grooved steel calibrat. roller -1st group96.06.71 Electronic positioning for working tableIt is equipped with decimal adjustment to preset higher or lower workpiece positioning.The worktable fall and rise is activated by a sensor and a microswitch located near the gauge.On/Off selectors allow to disatctivate this device in order to carry out the thickness set up by means of fall/rise worktable pushbuttons.32.18.41 Automatic anti dubbing deviceSyncrhronized with both feed belt seed. With thi sdevice it is compulsory to select the semi-stiff or elastic sectional pad.N/B- ON/OFF pneumatic selector for the pad is already includedIt is not available with the feed belt controlled by speed variator or inverter.25.14.31 "TSP/A" Semi-stiff flat padfor the sanding of veneered panelsThe pad is made of an extractable bar with rubber contact insert + felt density D=0.68mmN/B it must be linked to the automatic pad intervention or an electronic programmer of "logic" series.97.50.72 Main motor 18kw (25hp)

Powered by eBay Turbo Lister