~~The World's Best Camera Light Seal Kit Is Now Easier~~
Repair your camera's most common problem easily using the same material professional camera repairers use! Anyone can do it. Whether you call it light seal, light baffle, light trap, camera foam, camera seal, or whatever...you've found what you're looking for.
All pieces are pre-cut and ready to install from the most well-known and trusted name in camera light seal worldwide. Who says it is the best? Well, you could read about it...over the past 10 years, "The Light Seal Project" and I have been written about many times in magazines and on internet sites such as Amateur Photographer, Fotografare, IDCC, APUG, Nikonians, Matt Denton's site, Rick Oleson's site, Ron Herron's Mamiya site, Photo.net, Foto.ru, Classic Camera Repair Forum, Camera-fix, NelsonFoto, RangefinderForum, Tom Tiger's Zenit site, The Yashica Guy, Flickr, Nikon MF group and numerous others. In fact, Interslice kits have been featured 2 times in the past 3 months in Amateur Photographer...in the 125th Anniversary Edition, the kits were rated at 5 stars out of 5 possible stars!
~~There is simply no substitute for quality~~
These high precision products are manufactured to my specifications by companies who have proven their excellence over time, and only their finest products meet my professional standards. The foam I sell has been proven for over 40 years. It has to be the best to be used in my cameras, and you should not settle for less.
~~Instructions~~
I believe I've written more than anyone, and some have been translated into 8 languages including Finnish! You can see some of what I've written here:
http://www.kyphoto.com/classics/sealreplacement.html
Please don't be fooled by imitators. Common sense tells you to trust the proven sellers and the pros. I own this operation, and there are only two other people in the world authorized to sell my material. One lives in Germany and his ID is Camerasolution. One lives in Wales and his ID is Fatluckdigi. One of these people has been a partner with me 7 years...longer than many sellers have been on E-Bay.
This kit will allow you to re-seal the Nikon EM and FG cameras. If you have the FG, please tell me when you pay as the FG does not use the side foam pieces on the focus screen. I will list many more pre-cut kits on eBay soon, and if you have a camera you want me to make a pre-cut kit for, please contact me and we will discuss the possibilities. Below you can see the seal pieces you'll get in this kit:
When the EM was produced, Nikon evidently struggled with the focus screen / damper mount design. This has been a problem for repairmen for years. Let's look at what Nikon designed:
You can understand easily why those small strips on the side were a problem, can't you? Sure, they fall right off at the front edge. But not to fear, Interslice has solved yet another camera design problem in this kit. Here is how your newly re-sealed assembly will look:
And the best thing is it will stay that way when it is installed:
Now that is the way it should have looked to begin with...the Interslice way. Precision to the max.
~~Keeping the world "Greener"~~
Everybody talks about that, but the precision-cut seal pieces using the dies, cutters and templates I've engineered and made minimize waste greatly. Everything in the kits except the foam and self-adhesive fabric pieces is 100% biodegradable. Are you concerned about the planet, too? Cast your vote for environmental responsibility by purchasing this kit. Al Gore will be proud of you.
Cost of mailing? $1. That is right. No matter where you live, the cost is $1. One buck. One simolean. One greenback. That's all you'll pay.
Important note:
When it comes to camera repair / maintenance, buying the proper light seal material is of great importance. In fact, buying the wrong material is not only a colossal waste of money but also a needless mistake that could cause permanent damage to your camera.
The foam used in my kits is all made for me by the same manufacturer, and that is very important. You will realize the excellence the minute you feel it, and you will never forget this foam. To be certain I have any thickness a camera might need, here is a lineup of the materials I have made:
~Tiny Bubbles!~
For a more perfect camera sealing foam, you need three things: Tiny Bubbles, Ease of Compression, and quick recovery after compression. And my foam has it all! Take a very close look:
~The Free Tool~
There are two working ends to this simple but handy little tool, designed years ago from input and suggestions of customers and made with a machine I created. It allows you to clean and work on your camera more easily and with less danger of damaging paint.
This simple tool has been copied by people all over the world, but there is no substitute for the original.
What Comes With The Kit?
- The hinge end seal
- the hinge seal extensions
- two "Seal Strips"-- non-adhesive strips I created which are used to seal the long thin body slots
- the mirror damper
- the mirror damper side pieces (for the EM...not used in the FG)
- the reset lever upper door seal (not shown in the image)
- the instructions
- the bamboo tool
- you really do get all this for only $9.
Please look at my other auctions for other new products. If questions, please click on the words “Send me eMail” below. Notice: I reserve the right to limit the quantity of kits sold to any E-Bay participant.
Click Below to…
View my other E-Bay Auctions
send me eMail |
|
Back to homepage
) 
Print
Report item
