Portrait Flash Combo for Canon Rebel XSi XS 1000D 450D

The twin flash combo covers the everthing you need basically for outdoor portrait photography:

1. Thyristor Twin Flashes (x2)

This Twin Flash places light where, and when you want it!

It includes an adjustable flash heads that can be tilted vertically at angles 45º, 90º, 135º or 180º degrees. It can also turns 360º degrees horizontally.

You can use twin flash with the sub-reflector switched on for bounce flash operation. Bounce flash can make a softer effect and eliminate shadow on your subject. When you shoot directly at your subject, you might switch off the sub-reflector and use single flash only.

This versatile energy-saving thyristor flash has good power and provides you with quicker recycling times, especially when the subject is close.

The BUY IT NOW package includes TWO twin thyristor flashes. With the assistance of two flashes, you can produce a natural lighting effect from different light sources.

2. Cactus Wireless Flash Trigger V2 (x1) and Receiver V2 (x2)

This wireless slave flash trigger unit triggers other flash units when the transmitter is activated. Several flash units work together helps fill in shadows and improve the evenness of lighting.

Three components are included in this BUY IT NOW package, a transmitter and two receivers. The transmitter is to be attached on the hot shoe of the camera while the receivers are to be attached to external flashes. Each receiver works with one flash. You can use as many flashes as you wish as long as you have enough receivers.

With the wireless flash trigger, you can place the flashes at different angles and distances from the object. This is particularly useful for portrait and product photography. Most importantly, without the need to connect the flash by wire or cable, you can move the flashes to anywhere that produces the best lighting to the object you shoot. Flexibility provides you with the best result.

3. Flash Diffuser (x2) and Foldable Around-the-lens Diffuser (x1)

Flash units produce a harsh light, even when you use it with the little plastic built-in diffusers / reflector of the flash. To work close to a subject, you might need to soften this light. Two flash diffusers in this BUY IT NOW package (one for each flash) are here to help. Flash diffusers not only diffuse the light, they spread the light as well. It reduces the maximum working distance between your flash and the object. You can use this diffuser simply by fitting it in the flash head direct.

On the other hand, the foldable around-the-lens diffuser included in the package can be attached directly to the lens of your camera via the hole in the centre. This flash diffuser is very light and handy. It can be easily folded into a round shape with diameter less than 11.5cm. Net weight is only 29g. It could work to soften the hard light not only from the external flash, but also from the built-in camera flash.

4. U-shaped Flash Bracket w/ 90 degree flash rotate (x1)

The U-shaped flash bracket is a perfect assistance in holding the external flash in a certain distance with the camera. This is to prevent the direct flash to be produced by placing the flash unit on the camera's hot shoe. With the help of the bracket, the flash unit could be positioned a bit higher than the camera or the either side of the camera to produce fill flash and bounce flash without the need of an assistance.