Peugeot 306 GTi/XSi Uprated Lower Engine Mount Bush

The purpose of the lower bush is to dampen any engine movement. The bush has a very harsh existence due to its job and also its location (near the road surface so it has to deal with oil/grime/weathering). If you have excessive engine movement it is more than likely to be the lower bush at fault!

This auction is for a GrpN Solid Rubber Baker BM double bonded bush. These have been manufactured to a very high standard. They are intended to replace the original "Soft Bush".  This bush is much firmer than a standard item and will reduce engine movement to a minimum but it will still retain some vibration absorbing properties, unlike a solid aliuminium bush.

All mounts are stress relieved and Centerless Ground  for a perfect press fit. 

Advantages of fitting a BakerBM lower bush:-

• Fitting a solid rubber lower engine mount will significantly reduce engine movement under acceleration and braking.

• A worth while upgrade for an improved gear change, reduced stress on exhaust system and drive train.

• These bushes have a long live and are stiffer than other GrpN bushes that are on the market.

• Still retains some vibration absorbtion properties were as solid metal bushes will not.

• Ideal for track day/ race/ rally/ fast road

We can also provide mounts already pressed into the housing to reduce the down time of you car.

Grp A 306 Rear Beam Mounting kits also available.

Thanks for looking

Stewart Baker

Baker Bushes and Mountings