Permutit scale inhibitor w/fitting kit - 15mm pipework

Brand New.

Permutit Hard water scale inhibitor cartridge and 15mm pipework fitting kit.

These units and others like them retail for anything between £48 up to £72 each.

My selling price for this kit - £23.99 with free P and P anywhere in the UK.

5 units available. Selling and postage price is per unit.

If you live or have a business in the 'slightly' to 'very hard' water areas of the UK you need a Permutit Scale Inhibitor.

These inhibitors can reduce the possibility of the effects of hard water scale build up and even reduce the existing effects of hard water scale build up. The image below illustrates the effects of scale build up in a domestic water pipe.

The effects of scale build up will have an affect on your energy costs, as shown in the table below.

How does the Permutit the below table. Scale Inhibitor work?

· It works by proportionally blending a minute amount of a safe, food grade product into the incoming water supply.

· The amount blended is accurately controlled by the internal venturi system and is 'proportional' to the service water flow.

· The treatment works by suspending the scale forming hardness salts in the water, thus preventing scale build-up.

· This type of treatment is referred to as 'Threshold Treatment'. In many cases the treatment will even remove existing scale and then deposit a micro-thin, protective layer on the pipework and heating surfaces, thus preventing corrosion problems.

· It protects all pipes, hot water boilers, heating systems and domestic appliances. A 'Change Date' indicator ring for the Permutit scale inhibitor cartridge is fitted to every unit.

Installation of the Permutit Scale Inhibitor.

· Unit can be 'spanner' fitted into vertical, horizontal or angled pipe work.

· They can be located in the cold rising main supply or on individual appliances. · Full fitting instructions are included, for both hard and soft water areas.

· Where there is a possibility of secondary water expansion from the heating boiler back down the system, you are advised to fit a single check/non-return valve after the unit.

· The Inhibitor is virtually maintenance free and can bee fitted into just 72mm of pipe space. This unit will be affected by hot water transfer back down the system, therefore site the unit as far from the boiler as possible. It is recommended the unit is fitted just above the rising main stop cock.

Check my feedback - Bid with confidence!

Please leave feedback - we guarantee to leave feedback for you too.