|
Brand New Peugeot Sport
Group N 2" Exhaust
    
Peugeot 106 XSi - GTi - RALLYE
IMPORTANT
INFORMATION - PLEASE
READ BEFORE BIDDING
This exhaust system is available with 2
different tail pipe options. When the auction ends or you "Buy it Now"
you must let us know what tail pipe design you would like from the list
below. You can add this information to your Paypal note or send it with
your cheque. If we do not know what tail pipe design you want we cannot
dispatch your item!
|
|
 |
|
Option 1)
2" rolled out |
Option 2)
3" rolled in |
It was originally developed by Peugeot
Sport UK for the "106 Super Cup" championship using 106 GTi's prepared
to Group N specification. It was originally built for Peugeot Sport by
Magnex, but it is now built by Scorpion Exhausts Ltd in the UK.
It is a 2 piece stainless steel system featuring a long centre pipe with
a dummy cat and a single exit back box available in 2" or 3" as shown
above. It replaces the standard exhaust from the downpipe.
Please be aware this is a de-cat exhaust
which replaces the standard cat pipe on your car, so you will
not pass your MOT with this exhaust fitted.
It is a competition exhaust so obviously very loud! It burbles at low
revs but when revving hard the exhaust makes a distinctive "raspy" noise
but not like a typical aftermarket "boomy" noise. The exhaust will pop
and splutter when coming on and off the throttle due to its competition
development. Very difficult to describe the noise in words, but the
Peugeot Sport exhaust note is very well known in the Peugeot world!
The exhaust is very lightweight compared to the standard system so
immediately you will have reduced the weight of your car if you fit the
Peugeot Sport System. The Peugeot Sport centre pipe weighs 3kgs,
and the back box weighs 5kgs. This is significantly less than the
standard exhaust which weighs over 15kgs.
This exhaust system gives
excellent power gains. Independent tests have shown power increases of
around 7bhp over the standard exhaust. See dynograph below:
FITMENT INFORMATION -
PLEASE READ BEFORE
BIDDING
The Peugeot Sport exhaust system was originally designed for the
Peugeot 106 Series 2 GTi & Rallye, however it will fit the 106 Series 1
XSi and 1.3 Rallye models thanks to the extra brackets on the back box.
It will fit most 106 models including the ones below. The centre pipe
has no hole for the lamba so will not be suitable for GTi and Quiksilver
models that have the lamba position in the cat pipe.
  
A free fitting kit is
included which contains front joint bolts & gasket, middle and rear
rubbers!
|
Peugeot 106
1.3 Rallye |
Peugeot 106
1.4 XSi |
Peugeot 106
1.6 XSi |
|
Peugeot 106
1.6 Rallye |
Peugeot 106
1.6 GTi 16v (only for models with the lamba position on downpipe) |
Peugeot 106
1.4 Quiksilver (only for models with the lamba position on
downpipe) |
_____________________________________________________________
Any questions about this exhaust please email
sales@106parts.com
|
> PAYMENT METHODS:
> PAYMENT OPTIONS:
UK personal cheque, UK postal order, or credit/debit cards via PAYPAL only.
> POSTAGE & PACKING:
Your exhaust is carefully packed and sent
by our courier in the UK. Our delivery price is UK only - England,
Scotland & Wales. There will be surcharges to certain postcodes in Higher
Scotland, Channel Islands, Isle of Man and Northern Ireland. You will be
informed of any extra carriage by email after purchase.
> INTERNATIONAL DELIVERY:
PLEASE NOTE WE DO NOT SEND INTERNATIONAL DELIVERY FOR
THIS ITEM - UK ONLY.
|
|
Back to Search Results
) 
106parts
Print
Report item
