New Dual Digital F/C PID Temperature Control Controller

Main technical Specifications

Input
K type thermocouple (TC)

Accuracy
Measuring accuracy: ±0.5%FS
Cold-end compensation tolerance: ±2℃（can be modified by software in 0~50℃）
Resolution: 14 bit
Sampling cycle: 0.5 Sec

Display
Process value (PV), Setting value (SV)
Output, alarm and self-tuning can be indicated by: LED

Control method
1. PIN control (including ON/OFF, step-type PID and continuous PID)
2. Self-tuning control

Controlling output
1. Relay output: contact capacity 250V AC 3A (resistive load)
2. Voltage pulse output: 0/12V (suitable for solid state relay SSR)
3. Alarm function output: 1 way
Contact capacity of output: 250V AC 3A (resistive load)

Setting range
Setting value (SV): identical to measuring range (PV)
Proportional band (P): 0~full range (ON/OFF control when set to 0)
Integral time (I): 0~3600 sec (No integral action when set to 0)
Derivative time (D): 0~3600 sec (No derivative action when set to 0)
Heat-reset proportional cycle: 1~100 sec

Detective temperature range：0 to 400℃

Mis
1. Insulation resistance: >50M ohm(500V DC)
2. Insulation resistance: 1500V AC/min
3. Power Consumption: 10 VA
4. Service environment: 0~50℃, environment with no corrosive gas 30~85% RH

    *Only clean the instrument when power of
    *Please use a soft cloth or cotton paper to clean up the stain on the display
    *Do not clean up or touch the display by hard matters in case of any scratch
    *Never use sharp & hard matters such ass screwdrivers or ball pan to touch the buttons on the panel, in case of any scratch or damage.

A packet which includes:

    1 X PID Digital Temperature Control Controller F/C
    1 X Thermocouple (K type)

How to make the PID controller display in °F

Download Manual: TE-MT007_Ver 1.0_EN.pdf