NEW**** Handle gauge for all kitchen cupboard handles

Introducing the Handiegauge...COLOUR RED

The ingenious gadget that takes the stress out of accurately fitting handles and knobs.

Easy as 123! Simply position your first handle,set the gauge and you have an accurate jig ready for the next door.

Save time measuring each door, once the Handiegauge is set, further handles are a breeze

No more jigs that's don't work as well as you'd like.

Eliminate costly drilling mistakes

Ensure all handles straight and level - 100% the same on every door

Works horizontally and vertically

The Handiegauge will usually pay for itself in time savings alone within 2 fits

How it works in detail:

Place your handle on the door were you would like them, make sure the handiegauge is flush with the end of the door.

Slide the bottom gauge until it lines up with the screw hole on the handle, this is number 0, and pull out the top gauge until it corresponds with the second screw hole on the handle. This will give you say 0-6 when you line up the centre of both screw holes it is locked, so mark and drill. It’s that easy; Go to your next-door, place the handiegauge flush to the door, mark and drill. This gauge is locked in this position until you move the inner gauge or slide the top gauge.

The end of the gauge has 3mm lines to help place your handles in or out. Place the gauge on the cupboard or draw front, mark the end of the gauge with a pencil. Slide the gauge until you have the desired place, mark and drill. So if you moved the gauge three lines over you do the same on the next cupboard or draw front, Mark and drill.