Morso F double mitre and alpha 1m underpiner everything

                                                        Here We Have Complete Picture Framing Business

I spent alot of time hard work and money to get all this stuff together due to slip disc i can no longer do this kind of work anymore hence am selling everything you need to setup picture frame manufactuing businees all you will need buy is 2mm glass beacuse i dont have it.

what is included

Morso F Mitre Guillotine - Foot operated  (in very good condition) with instruction book

Alpha 1m underpinner (Allmost new) with instruction book

with boxes of  v nail as you can see in the picture

Fletcher frameMaster Point driver

bags of other accesories

Hundreds of poster like Lurrel and Hardy, James Dean, Dalmations, Cars, and many more

A about pallet of cardborad

Over ten lenghts of framing profile

Works bench

Cash On Collection

The ALPHA 1 M  is a professional, quality underpinner for joining mitred lengths of moulding.

It is quickly adjustable for different widths and heights of mouldings. The top pressure pad is L-shaped steel with a hard felt pad, held in place magnetically to allow you to adjust it to the ideal position relative to the moulding profile. It has a horizontal rebate clamp to pull the moulding firmly whilst it is being joined. It uses Alfagraf 'Power-Twist' wedges which draw the moulding together as they are inserted. The insertion hammer is solid steel and is guaranteed for two years. The 'Alpha 1/M Super' takes mouldings from 6mm to 80mm wide. The working surface is 1000mm from the floor. It comes with interchangeable blocks for 7mm, 10mm and 15mm wedges.

 Morso F Mitre Guillotine - Foot Operated:
MORSO-F cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.
MORSO-F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.
The F has a special lever system for wide profiles - the knife block has stepped horizontal adjustment allowing progressive cuts until the full width is achieved. Twin return springs automatically bring the knives back to starting position.
When using MORSO-F you will have no dust compared to a saw. Also the waste of your moulding will be minimized as MORS+-F cuts double mitres very close. ( less than one mm waste of moulding ). The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre. One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding................( That is only with 100 cuts a day...... ).
MORSO-F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences (45-90°), and adjustable rebate supports as well as a perspex guard.
Technical data for MORSO-F

Double mitre 45°
Single mitre up to 90°
Cutting width max. 100 mm
Cutting height max. 160 mm
Square cutting 65/65 mm
Measuring scale up to 1500mm
Net weight 98 kg

                                Any Viewing Wellcome Please Ring 07773631148                    

                                                 Please no time wasters