|
|
GET FUR COVER FOR COVERING BLIMP
ABSOLUTELY
FREE | | 
|
This kit includes:-
- elastic frames for microphones until 2 cm diameters
- tripod connection 3/8“ for assembly at tone hinge / tripod (vertical
assembly possible)
- Handle with grip.
- Three different sizes of mic holder.
|
Features:-
- Angle of the basket through the joint is freely
adjustable.
- Wind protection basket is removable.
- Flexible and stiff plastic skeleton in the wind basket in contrast to
other wind baskets.
|
It can be used
with microphones upto 20 Inch.
For Long Mic
MKH-70
|
Two of the worst problems that effects location sound recording are
WIND NOISE and RUMBLE.
HANDLING NOISE
Wind noise is
that blast of distortion and audio breakup caused from wind physically striking
the sensitive diaphragm of the microphone capsule. For example sound when
someone blows directly into a microphone. This wind noise can be prevented.
That's what a windscreen does. Another
reason to always use a windscreen is to physically protect the microphone from
dust and accidental impact. |
|
| The use of a blimp screen is very effective
because it tends to disperse the oncoming wind, thus reducing velocity but also
eliminating the ACOUSTIC noise generated by high wind physically striking the
outer shell of the blimp. |
| |
|
HANDLING
SHOCKS
Rumble can be defined as unwanted
vibrations transmitted through objects into the mic capsule itself. Examples of
rumble include ground or floor vibrations caused by nearby traffic, heavy
footsteps and building/structural
vibrations.
Solution:- The solution to rumble lies in isolating the microphone from
these vibrations by some means of free-floating suspension which is the role of
a good SHOCKMOUNT.
|
|
|
Shockmounts are featured MICROPHONE CLAMPS.
This universal shockmount consists of two pair of thick ru bber
bands arranged tic-tac-toe fashion within a cylindrical framework. The mic is
held inside of the "center circle" of the grids formed by the rubber bands.
It will support just about any mic on the market except for the long
shotguns. |
|
| Different shapes
of mic holder is included in this kit. Thus this kit
will be used with large variety of different mic. |
|
|
Free
Boom Pole Adaptor for Blimp Windshield
Windkorb | Blimp can be used in the variable boom pole. Just
remove the blimp handle,and screw in the adapter to use your boom pole.
|
Blimp is attached with a removable top screw or adapter to allow for
quick and easy mounting of your various boom poles. This removable top screws
are made up of plastic .
It
is made from lightweight high-strength plastic. The adaptor supports 3/8" hole
for boom pole. |
|
| There is a small threaded adaptor which has 1/4''-6
threads for Boom pole . It can be removed, so that boom pole in the 3/8''
threads can be used in the blimp. |
|
|
Suitable for use with
these microphones
|
- AKG: C568EB, CK8 +
C451 or C460, CK68 or CK69ULS + C460B (reduced, full or demountable) CK98 +
SE30
|
- Audio Technica:
AT835b or ST, AT4071a, AT815ST, AT877, AT4073, AT897
|
- Beyer: MC716,
MC726, MC736, MC836, MCE86(N), MCE87
|
- Neumann: KMR81,
KMR82 Sanken: CS-3, CSS5, CMS9
|
- Sennheiser: K6 +
ME66 or ME67, K3U + ME80, MKH60, MKH70, MKH416, MKH41
|
- Sony: ECM670,
ECM672, ECM999
|

We accept payment
through following modes
- Paypal
- 2co (via credit card)
- Bank Transfer (If you want to use this mode contact us for Bank
Detail)
Payment should be Completed within 10 Days after the
Auction.
- Shipping charges are
non-refundable.
- We ship world
wide.
- An attractive " SHIPPING DISCOUNT "
is available on purchase of more than one item at a time.
- The item will be despatched within
2 business days after the payment made.
- We Ship World Wide ! Usually you
get your item in 4 - 8 business days. We will email you with confirmation soon
after it is shipped.
- Buyer must contact us if never
received the item after 30 days.
- If item not receievd within 30
business days after payment made, any purchase will be posted
again.
- We can ship our product as " Gift
". Please feel free for any special request.
|