Brand New

Lansky

Sharpening System

DELUXE .

For a Sharp Consistent Edge Every Time

5 Whetstone Kit

·       Packed Size Approx. 220mm by 110mm by 45mm.

·       Lansky Superior Quality Whetstones.

·       Great Starter Kit, Very Easy to Use (As Easy as 1,2,3).

·       All You Need to Achieve a Super Sharp Cutting Edge.

·       Strong Sturdy Construction, for Years of Reliable Sharpening.

The Lansky “DELUXE” Guided Sharpening System

The Lansky “DELUXE” Sharpening Kit is the most effective way to sharpen all of your Sporting, Hobby and Household knives.  The patented Lansky System makes it easy for you to get the consistent angle that you need for a professional edge on every knife, in just 1,2,3, simple steps.

The Lansky “DELUXE” Sharpening Kit is a “Guided Knife Sharpener” that is clamped onto the back of a knife blade allowing you to precisely direct a sharpening whetstone stone along the blade’s cutting edge, make it possible for you to achieve a very accurate bevel, and therefore an incredible Razor Sharp cutting edge on your knife.  With the Lansky “DELUXE” Sharpening Kit you can take any old knife that is on the verge of being thrown away, and give it new life, easily removing chips and knick on the edge and then restore it to a razor edge.  (See above photos).

What You Get with the Lansky “DELUXE” Guided Sharpening System.

The Lansky “DELUXE” Sharpening Kit comes complete with:

1)    Knife Clamp with Angle selectors.

2)    Five Finger-Grooved 110mm (4 inch) Sharpening Hone Whetstones,

a.     Extra-Coarse (70 Grit) Whetstone.

b.     Coarse (120 Grit) Whetstone.

c.     Medium (280 Grit) Whetstone.

d.     Fine (600 Grit) Whetstone.

e.     Ultra-Fine (1,000 Grit) Whetstone.

3)    Five Guide Rods.

4)    Specially Formulated Honing Oil.

5)    Custom Moulded Storage/Travel Case.

6)    Spare Wing-Nut and Knife Clamp Screw.

7)    Full Instructions.

The Lansky “DELUXE” Sharpening Kit is a great is a great choice if you have lots of old dull knives that need to be re-shaped or re-sharpened, bringing them back to a Razor Sharp Cutting Edge.

You can expand the range and sharpening characteristic of the Lansky “DELUXE” Sharpening Kit by adding the Super Sapphire (Polishing) Whetstone, the Serrated Knife Blade (Medium & Fine Grit) “V” Whetstones as well as the Lansky Diamond Whetstones and or the Natural Arkansas Whetstones, at a later date, to make the Lansky Sharpening System into the ultimate sharpening system ever, capable of sharpening any knife you could possibly wish to sharpen.

(See my other listings for all of the Lansky Sharpening Systems items on offer).

Accurate Guided Sharpening

Using guided sharpening, with the Lansky “DELUXE” Sharpening Kit, will give you precise and consistent bevelled angles, which cannot be achieved by hand-sharpening alone.  These exact angles, when sharpening; produce the ultimate in fast, precise knife edges, which will quickly make your knives sharper than you have ever had them before…Razor Sharp!

With the Lansky “DELUXE” Sharpening Kit any knife edge can be, easily, quickly and consistently sharpened and re-sharpened to an incredibly super sharp cutting edge that is not just be sharp, but “RAZOR-SHARP”!

The Lansky “DELUXE” Sharpening Kit guide is quickly and easily attached to the back of a knife, within just a matter of seconds, allowing you to bring back to life, within just a few minutes, any dulled knife blade you wish.

With just a small amount of practice, you can restore, what you thought was just an old and useless knife blade, a knife that you might have be thinking, should be just thrown away, because it is beyond hope of ever being re-sharpened again; these old knives can be re-sharpened, sometimes within minutes, to a perfect Razor-Sharp edge.

Once your blade is sharp the Lansky “DELUXE” Sharpening Kit can be stowed away in its tough carrying case within a couple of seconds.

The Lansky Sharpening 110mm (4 inch) Whetstones used in all of the Lansky Sharpening Kits are great for re-shaping, abrading, Lapping, dressing, sharpening and honing a whole host of items and tools such as; CHISELS, MOULDS & DIES, CHIPPED GLASS, CHEF KNIVES, CARVING TOOLS, GOUGES, SCISSORS, WOOD TURNING TOOLS, AWLS, UTILITY KNIFE, PLANE BLADE, SKEWS, WATERSTONES, ROUTER BITS, AXES, BUTCHER KNIFE, FILET KNIFE, BUSHCRAFT KNIVES and SHEARS.

Versatility and Controlled Angles

The Lansky Sharpening System is a very flexible guided sharpening system that offers four variable angles that range from, based on a 1" wide blade, 17 degrees (the shallowest) to 30 degrees (the steepest).  The four angled choices are: 17, 20, 25 and 30 degrees.

17° ANGLE.

A severe angle only recommended for Razor, Scalpel and X-Acto® blades or similar tools.  This angle provides an extremely sharp but highly delicate edge.

20° ANGLE.

A commonly used angle for higher grade, quality blades.  This angle provides an excellent edge for these types of knives, and is also Ideal for kitchen knives.

25° ANGLE.

The recommended angle for most knives that need a durable, sharp edge.  This angle is ideal for hunting and outdoor knives.

30° ANGLE.

An outstanding angle for knives that see the heavy use of cutting cardboard, wire or carpets.  This angle is for heavy duty use where the edge will be taking a lot of abuse.

How to Use the Lansky Sharpening System

You should clamp the knife with the Lansky Blade Guide in the centre of the blade for optimum control, when using longer blades.  To sharpen, hold the handle of the knife and rest your fingers on the block of the knife blade.  Slowly draw the knife from the heel of the blade (near the handle) down the Whetstone towards the tip of the blade.

Make sure that the edge of the blade is in contact with the Whetstone during the whole stroke.  This you do by lifting the handle up slightly as you reach the tip of the blade, then turn the knife and blade guide over and repeat the process on the other side of the knife.  (See above Photos).

1)    ATTACHING KNIFE BLADE: Loosen front locking screw of knife clamp with small coin, screwdriver or your fingernail to accommodate thickness of blade.  Attach clamp to back, or spine, of knife blade at the centre of knife blade. Using Coin, or screwdriver, tighten the locking screw to hold knife securely.  Lock blade in place by hand, tightening thumb screw on knife clamp.  NOTE: For very small blades use the notch in knife clamp. Position regular and oversized blades beyond notch and well into knife clamp. (See above diagram.)

2)    ASSEMBLING THE HONE: Place guide rod through hole in hone holder so that rod and holder form a straight line.  Using finger pressure only, tighten the screw on hone holder to hold rod securely.  Check straightness and alignment with hone against a flat surface (e.g. a table or the storage case of this kit) to be sure rod and honing stone touch fl at surface along entire length.  If rod is not level with stone, bend it into alignment using light finger pressure only.

3)    SHARPENING PROCEDURE: Before you begin, please note above photo showing how to hold knife clamp and hone safely.  Beginning with the Coarse stone, apply a few drops of Lansky honing oil along surface of stone and insert guide rod into angle hole you have selected.  The preferred stroke pattern is to start at point A (See above Diagram) and push to B with only enough pressure to make the stone work. Lift the stone and return to C. Hone from C to D and lift to E etc.  Always remember to keep the guide rod at bottom of hole to keep a consistent and accurate angle as you sharpen.  Next turn the knife and clamp over and repeat using the same angle you used on the first side of the blade.  Repeat this process with consecutively finer stones until you achieve the degree of sharpness you are happy with.  Keep stones clean/oiled as you work, and maintain the same sharpening angle throughout the sharpening process.  You will note, as you sharpen, that the stones will begin to move smoothly.  This indicates pores of the stones may be clogging with filings, which reduces effectiveness of the stone.  You can prevent this by occasionally wiping the stones with a rag and always when through sharpening.  This is the only cleaning necessary.

Dimensions of the Lansky “DELUXE” Sharpening Kit.

Outdoor enthusiasts everywhere can, easily, carry one of the Lansky “DELUXE” Sharpening Kits around with them, whilst on walks, day trips, camping trips, or expeditions, as they simply stow away into a handy, small and compact carrying case.  The carrying case is made from tough injection moulded plastic that measures approximately 220mm (8.5 inches), by 110mm (4 inches), by 45mm (1.75 inches) and weighs about 510 grams (Kit Included).

Lansky and the Outdoor Enthusiast

Enthusiasts worldwide use the Lansky products to care for their cutting edges.  Just as essential as your pocketknife, Lansky Sharpeners are lightweight, easy to carry and durable.  They withstand harsh environments and sharpen all kinds of knives, tools and edged equipment that hunters, hikers, rock climbers, adventurers, campers and sportsman rely on to survive and enjoy the outdoors.

• Out in the field, or back at camp, Lansky Sharpening products are an outdoor essential.  A dull cutting edge is a dangerous cutting edge.
• In addition to sharpening hunting and pocketknives, Lansky products are popular for sharpening a wide range of household knives and tools such as kitchen knives, pruning shears, axes, scissors, chisels, router bits, utility blades etc.

Lansky in the Kitchen

Lansky Sharpeners will quickly sharpen your stainless steel or carbon steel kitchen cutlery while removing a minimum of material from the blade - unlike electric sharpeners.

Manual sharpening with Lansky products is fast, easy and versatile.  Whether you have a common chef's knife, a Japanese Sashimi knife or even a steep-angled meat cleaver, Lansky can do it all.

Each time you sharpen with the Lansky Sharpening System you are only removing, a very small amount of steel thus keeping the edge of the knife thin and the angle maintained.

Many chefs and home cooks prefer to use the Lansky Sharpening System to sharpen their favourite knife.

Shopping with Confidence

Shark Designs Bushcraft Fire Steel is a fully paid up members of the eBay Power Sellers alliance, which is a sign of Trust, Quality and Excellent Customer Service.

Shark Designs Bushcraft Fire Steel is also a Fully Verified Pay Pal Business member.

So you can be guaranteed that:

All Items listed are kept in stock.

All Items are usually posted within 24 hours (check out previous customers Feedback comments about our speedy deliveries).

All of our goods are Brand New (unless otherwise stated).

All items purchased from us, are given our special Shark Designs “Quality Assurance/Guarantee Sticker”, which pledges that the item was checked before dispatch and was fit for use and was in full working order.

All of the items we sell are used by use and are the very best quality products we can find.

BE OFFERED IT FIRST!!!

Be the first in the queue when SPECIAL OFFERS are made, just add us to your favourites list and we will let you know about it first.

Please, visit my eBay Shop Shark Designs – Bushcraft, Fire & Steel for more great Bushcraft products.

Thank you for looking at this listing.

Please visit our eBay Shop

Shark Designs: Bushcraft, Fire & Steel

If you have any questions about this product please contact us at info@sharkdesigns.co.uk.  We will always do our very best to answer any questions or issues that you may have.