|
| Reduce wear by 97% | UNIQUE NEW PRODUCT
K-Tek is an entirely new formula which reduces friction anywhere that ferrous metal moves against metal.
K-Tek is:
- non-petroleum-based
- non-flammable
- non-corrosive
- non-toxic
- environmentally friendly
- synthetic
- anti-friction ferrous metal treatment
K-Tek is added to oil, hydraulic fluid, and greases to treat (automotive) engines, motors, transmissions, power steering units, and bearings that require grease.
K-TEK ACTUALLY TREATS THE METAL
K-Tek is not a traditional oil or grease additive, but a new concept in metal treatments. K-Tek is actually absorbed into the metal and adds no volume to the fluid into which it is added. K-Tek penetrates into ferrous metal and reduces friction on metal surfaces by up to 97% when compared to oil or grease alone.
Even under heavy pressure when oil barriers are "squeezed" from the metal surfaces,
K-Tek continues to protect the wear surfaces. K-Tek has no effect on any metal except ferrous (Fe).
By reducing friction up to 97%, K-Tek:
- Increases fuel mileage between 5 to 15%
- Increases power and performance
- Lowers operating temperature
- Quiets the engine and transmission
- Extends engine and transmission life up to 235%
HOW DOES IT WORK?
Adding K-Tek benefits the engine, transmission, power steering, machinery and other treated areas by significantly reducing wear and friction. K-Tek modifies metal surfaces, on a molecular level, at all friction areas. Reduced friction can best be illustrated using the industry standard Timken bearing test. In the Timken bearing test, a bearing is rotated in an oil bath and a metal "bullet" is lowered onto the bearing as increased weight is applied. The damage to the "bullet" and the time to achieve the damage reflect the anti-friction properties of the lubricant.
The results clearly shown a massive reduction in the size of the wear scar following treatment with K-Tek (see image above). The larger magnification also shows how smooth the surface of the metal has become.
K-Tek actually changes friction into "friction protection" as it rebuilds the metal surfaces using the by-products of the friction process. The pure iron that is worn off the friction area is modified and deposited into the low points of the friction surface producing as near as technically possible a perfectly smooth surface area. The resulting surface area has a "diamond-like-hardness" that increases the load threshold by up to 10 times.
IS K-Tek SAFE?
Unlike other anti-friction products, K-Tek is a unique synthetic formula that treats the metal at the molecular level. K-Tek contains no harmful fluropolymers, paraffin, chlorinated hydrocarbons, graphite, Teflon® ethers, black and non-ferrous metals, or ceramics.
K-Tek is not harmful to the environment and is biodegradable. This means that it can be used in sensitive situations such as food production, agriculture or where human contact may occur.
K-Tek has complete chemical affinity with mineral and synthetic petroleum and is soluble in all known lubricants and fluids. Because it is chemically inert, K-Tek does
not disturb the pH-balance of motor oil, automatic transmission and power steering fluid, hydraulic fluid, gear oil, or any grease. Plus, K-Tek blocks oxidizing processes on metal surfaces.
K-Tek will not void any OEM warranty. K-Tek meets or exceeds all DOD specifications per Attachment 1 - Appendix 3 of TACOM-TARDEC-DIVISION-PETH20-FUEL/LUBE and API-SAE lubrication standards.
Since K-Tek is absorbed into the metal, it does not increase fluid volume. No oil has to be drained prior to adding K-Tek.
WHERE CAN K-Tek BE USED?
K-Tek can be used anywhere that metal moves against metal e.g. Motor engines; Gearboxes; Printing Presses; Conveyor systems; Milling equipment; Metalworking; Firearms; Drilling etc.
In fact virtually any industry can benefit from K-Tek, such as Transport; Marine; Construction; Mining; Food; & Pharmaceutical.
These are just a few possible situations where K-Tek can help to reduce friction, wear, noise and heat and therefore save energy and maintenance bills.
We personally use this in all our vehicles and have certainly saved money in both extra mpg and reduced maintenance
The Company
We as a Business market our products as Quick-Fix Solutions by that what we mean is that we sell tried and tested products to cure/relieve most mechanical problems associated with wear in the Motor and Allied trades and supply a range of top quality Engine and gearbox oils Our range includes products that
1. Reduce mechanical noises and compensate for wear and stop smoking
2. Cures for overheating problems due to cracked Heads/Blocks, Blown gaskets or worn- inefficient cooling systems
3. Power steering Stop leaks that are guaranteed to work and wont damage the systems seals
4. Automatic Gearbox stops slip that stops slipping, rough changing
5. Engine and gearbox Oil Stop leaks that stop both seal and gasket leaks
6. Flushes for the Engine oil and cooling systems
7. Upper cylinder Lubricants that reduce emissions and increase MPG
8. Quality engine and gearbox oils of most grades
9. Octane booster that can give up to 8 octane increase
10. Greases marine specification
11. Aluminium Welding Rods low temperature that don’t need TIG or Argon
12. Flashlube Kits and lubricants
13. Epoxy steels for both low and high temperature applications
14. The worlds most advanced anti friction ferrous metal treatment reduces engine wear increases MPG
15. Solderless Copper Bonding for joining copper pipe without heat
These items are all available in our ebay shop
Our Suppliers Include Lucas Oils USA, Kalimex, Flashlube, CTS, Golden Eagle
We test all our products before offering them for sale and they are all guaranteed to do what they claim although there will be instances where the fault is beyond the capabilities of the products have a read at my feed back there are lots of comments
Have a Browse through my Ebay shop or if you are doubt as to what you need or need advice Email or call the office on 01909 477955 for more information
Terms and Condition
Payment by Paypal, debit / credit cards by calling 01909 477955 (leave message if office unattended for call back) personal cheques are given 5 days to bank and clear Items are normally posted within 48 hours of Order. International buyers must pay via Paypal
Postal Costs
We now have standard UK postal costs on all our items which are £3.95 on smaller items £5.95 up to 1kg and £9.95 up to 30 kg (some area restrictions apply) I ask all buyers outside the UK to get a quote for shipping before bidding International items up to 2kg are sent via airmail but are at the buyers own risk
VAT
All our item prices include vat unless otherwise stated
Feedback
Our service is set up to automatically leave positive feedback as soon as it is received
Thanks for Looking
Phil
| 
Back to homepage
) 
Dukeries Engineering Ltd
Print
Report item
