GE SmartWater MWF Cartridge that fits GE and Hotpoint refrigerators with a round white plastic filter, typically mounted inside the refrigerator at the rear of the compartment - above the top shelf.
Direct from the manufacturers-factory sealed-original.
The MWF Filter replaces these older filter part numbers:
GE SmartWater GWF, GWFA, GWF01, GWF06, MWFA
Hotpoint HWF, HWFA
The MWF Filter removes the following impurities from your drinking water:
99.00% of Lead, 93.00% of Mercury
99.00% of Asbestos, 96.00% of Benzene
99.00% of P-Dichlorobenzene, 99.99% of Cysts
94.00% of Atrazine, 99.00% of Alachlor, 98.00% of Carbofuran
99.00% of Lindane, 93.00% of Toxaphene
98.00% of 2,4-D, 96.00% of Chlorine
98.00% of Turbidity, 99.10% of Particulates (Class I)
As with all built-in refrigerator water filters, the MWF does not remove Fluoride
The MWF cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53
The SmartWater Filter MWF should be replaced every 6 months or when the "change filter" light comes on - whichever comes first.
Installing your new water filter:
1. Twist the old filter a half-turn counterclockwise
2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
3. Fill the new filter with water (you can use the cold water faucet on your kitchen sink)
4. Push the new filter up into the fridge until it stops
5. Twist the filter a half-turn clockwise
6. Reset your "change filter" light (if your fridge has one)
Resetting your "change filter" light:
·Press and hold the reset water filter button on the dispenser for 3 seconds.
We will send you a no obligation reminder when your filter is due to be replaced.
PLEASE NOTE..These filters are Genuine original Branded Smartwater
GE-MWF and factory sealed