HUGE Neodymium Block Magnet 50mm x 25mm x 10mm (Pk 2)

YOU ARE ADVISED TO WEAR THICK GLOVES TO HANDLE.

The grade is N45 and they are triple plated, nickel-copper-nickel.

The North and South poles are on the 50mm x 25mm opposing flat faces.

Maximum pull 24.8kg.

Ideal for industrial use including wind turbine generators.

The flat surfaces grip with extreme strength to sheet metal.

PLEASE, PLEASE OBSERVE THE SAFETY INSTRUCTIONS BELOW.

TECHNICAL

Neodymium magnets have a maximum operating temperature of 90 degress C

above which their power deteriorates rapidly.

Although triple plated they can quickly degrade in steam atmospheres.

They can be fixed with good quality adhesives such as Araldite.

 

Safety when handling

Neodymium magnets

PLEASE OBSERVE THE FOLLOWING CONDITIONS WHEN HANDLING NEODYMIUM MAGNETS

►KEEP AWAY FROM MAGNETIC STRIPS ON CREDIT CARDS AND BANK CARDS

►Neodymium magnets can attract ferrous metals and other magnets over large distances risking physical injury

►Be particularly aware when placing two magnets together as the sudden attraction can easily trap fingers   

►Neodymium Magnets should never be given to children

►Neodymium magnets are hard and brittle and may shatter if allowed to ‘jump’ together or onto a metal surface

►It is recommended that eye and hand protection should be worn

►Strong magnets can interfere with sensitive electronic or mechanical equipment and should be kept at least 300mm from such devices

►Never travel on an aircraft without first declaring the magnets

►Magnets can destroy information held on magnetic media such as credit cards and computer drives

►Watches, computer monitors, televisions and mobile telephones can be seriously damaged by placing magnets near them

►Users of heart pacemakers should never handle strong magnets

►Never use magnets in potentially explosive atmospheres as sparks may be caused