Gledhill Torrent HP Heat Pump Cylinder 210L HP SOLAR

Gledhill Building Products were the first manufacturer to offer a range of domestic thermal stores and unvented cylinders specifically designed to work with air source and ground source heat pumps. Following extensive research and development, we have used decades of experience to optimise various aspects of the cylinder, most notably the heat exchanger and additional sensor pockets, to provide a solution suitable for a range of air source heat pumps. Two solutions are offered that provide maximum flexibility for the installer. Both of these solutions are ‘solar ready’ i.e. even if solar panels are not fitted as part of the original installation, the cylinder is ready for them to be connected at a later stage. Tappings The Torrent HP comes complete with all the necessary connections for the various heat sources together with connections directly off the store for central heating. The heat pump connections are 22mm compression fittings and those for the solar heat exchanger are 15mm. Also included are two 10mm dry pockets for the heat pump sensors together with a 15mm internal threaded connection to allow a dry pocket to be fitted for the cylinder thermostat.

Developing the concept Gledhill have led the way in developing the concept of thermal stores since 1980. The latest version has been designed to get the best possible performance from a heat pump in a unit capable of being linked to other alternative energy sources such as wood burning stoves or solar thermal panels. There are numerous other possible installation options (e.g. heating taken directly from the heat pump. These are shown in detail in the installation manual). The true significance of a thermal store in these circumstances should not be underestimated; • The store is safe to use with a wood burning stove. • Energy put into the store from whatever source can be used for both heating and hot water. • There is no requirement for a pressure and temperature relief valve, there is therefore no need to design safe discharge facilities into the property. • A thermal store can operate with less “on-peak” top up than an unvented cylinder when heat pumps are used as the main energy input.

If you need help selecting your cylinder listing please call us on 01326 378 781