General Gen-Ear LE
Water Leak Location System
Mod #GR-LE
The new Gen-Ear LE is better method for tracking down water leaks. It’s a simplified, more economical tool with stronger sound amplification than other systems. Use it to pinpoint water leaks in residential and commercial water lines, whether they are under concrete slabs, in walls, swimming pools and hot tubs. The compact amplifier fits easily in the palm of your hand. It provides noise-free amplification with built-in preset audio filters, so you don’t have guess what settings to use. And the high performance headphones with noise cancellation features block out interference from surrounding ambient noise. The ground sensor listens for the gurgling or hammering of water escaping from a cracked pipe under concrete, asphalt, or tile. For soft surfaces like grass or carpet, use the probe rods. Or, for above ground pipes or hydrants, you can use both the probe rods or the magnet attachment.
For especially hard to find leaks, the Sound Amplification Module adds air to the line, increasing water pressure. This amplifies the leak sounds, making them easier to locate.
The Gen-Ear LE will save you a lot of guesswork and unnecessary digging. And that saves you a lot of money.
1.Ground Sensor
Finding the leak starts with a quality ground sensor. It locates leaks through
hard surfaces, concrete,tile, etc. Threaded nipple accommodates sectional probe rods or magnet. Wind proof, shock resistant housing protects against handling noise interfering with locating process.
2.Sectional Probe Rods
Looking for leaks under soft surfaces such as grass or carpet? The Probe Rods allow for easy sound sampling for leaks. Three one-foot probe rods thread into the sensor.
3.Sensor Magnet
Sound surveying is much easierwith the sensor magnet attachment. It
threads onto the sensor to listen for leaks through above ground pipes,
fire hydrants, water mains, iron valves, or steel pipes and fittings.
4.Amplifier
Take the leak sounds and pump them through the powerful amplifier with built-inpreset audio filters, low battery indicator light, and volume control. It’s mounted in a durable housing that fits easily in the palm of your hand. Safety mute button automatically shuts down the system when the headphones are removed to extend battery life. Includes builtin flashlight for night location jobs. Operates on two AAbatteries.
5.High Performance David Clark®Stereo Headphones
High quality headphones give you the clearest sound with superb noise cancellation features to block out interference from surrounding ambient noise.
6.Sound Amplification Manifold (SAM)
Hard to find leaks get a boost with the SAM. It helps
amplify hard to hear leaks by using air to pressurize the
water line making leak location easier.
7.Heavy Duty Carrying Case
Made of high-density polyethylene. Designed to withstand heavy use and protect your
investment.
GR-LE Includes:
Gen-Ear LE Specifications:
-
Amplifier: Input Impedance: 430k, Output Impedance: 4 – 10 Ohm
-
Amplification: 56 db +/- 3%
-
Filter Characteristics: 100 ~ 1000 Hz
-
Power: Two 1.5-Volt AA Batteries
-
Power Consumption: 20 mA
-
Dimensions: 5-3/4" x 1" x 2-1/2"
-
Weight: 1 lbs.
-
Operating Temperature: 20∞F ~ 130∞F
-
Sensor: Element: Piezoelectric Element, Sensitivity:1.00V/g at 400 Hz (Max.)
-
Headphones: Dynamic Range: 10 - 20,000 Hz Noise Reduction Rating: 23db
-
Carrying Case: Dimensions: 20" x 13.5" x 9" Weight: 7.5 lbs
Click Here for Instruction Manual
Click Stores Icon for More Items in our eBay Store
Warranty
Gen-Ear water leak locators carry a two year limited warranty against defect in materials except as noted below. Should any part break or fail to work properly in the two years following purchase, it will be repaired or replaced at our discretion at no charge.
Damage due to negligence, rust, exposure to corrosive chemicals, improper usage, failure to follow instructions, accidents, or alteration from original design is not covered by this warranty.
In order to handle any adjustment with a minimum of delay, please follow this procedure:
Return the part to your wholesaler, and have them notify us immediately with complete information on the problem. On power machines, we must have the serial number, the date of purchase, and the name of the wholesaler from whom your machine was purchased. To activate your machine warranty, your warranty card must be filled out and sent to us immediately after your machine is purchased. We will then advise your wholesaler if the part should be returned to us and assign a return merchandise authorization (RMA) number. Ship freight prepaid, and you will be compensated for these charges if it is determined that the part is defective. If repairs are necessary due to conditions beyond our control, or if the item is out of warranty, we will do the work at the lowest possible cost, but a charge will be made. This warranty is made in place of other warranties, expressed, statutory or implied, including those of merchantability and of fitness for purpose. General shall not be responsible for any incidental or consequential damages.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion of limitation of incidental or consequential damages, so these limitations may not apply to you.
Back to homepage)nSwBWk~$(KGrHqYH-CQEq)un6mUlBKs-hYr,cQ~~_35.JPG)
)nSwBWk~$(KGrHqYH-CQEq)un6mUlBKs-hYr,cQ~~_14.JPG)
)oLQBmk~$(KGrHqIH-DQEqtV2Dy8dBKs-hbJRsw~~_14.JPG)
)o5QB2k~$(KGrHgoH-CIEjlLl4NtwBKs-hdZ2)!~~_14.JPG)
)phQCGk~$(KGrHgoH-DEEjlLl0zoyBKs-hf(fhw~~_14.JPG)
) 
giantsupply
Print
Report item
