~Pictures show what actual stickers will look like~
Check out all our other similar decals in our eBay store
These High Quality Decals will stick to ANY smooth surface:
FIBERGLASS, ALUMINIUM, METAL, GLASS, FINISHED WOOD, WALLS, PAINT & MADE TO LAST!
Approximate Size of Sticker:2.5"TALL X 8.5" WIDEchoose your color!
BIGGER & LESS MONEY THAN OTHERS!!!!
You will get 1 New: got auto loan ? Sticker/Decal!
All of our stickers are made of 5-8 year vinyl and we are
sure you will be happy with the quaility of your sticker.
Your color choices are: BLACK, BLUE, GOLD, GREEN, DARK GREEN, ORANGE, PINK, PURPLE, RED, MAROON, SILVER, BROWN, TAN, WHITE, YELLOW.. if you want another color just ask me I might have it... thanks!! please choose a color or white will be sent! thanks!
You can choose your color from the color choices above you can leave the color choice during checkout (add note to seller) or leave me a ebay message! I will not receive it if you send it to my standard email address. only the paypal notes and ebay messages will be received If you do not specify a color asdescribed below you will get WHITE!!
Before leaving neutral or negative feedback, or if you have any questions or concerns please message me so we can work it out! thank you!
Installation instructions:
Each decal is made up of 3 Layers:
1. The top layer is transfer tape just like masking tape.
2. The middle layer is your vinyl decal.
3. The bottom layer is the paper backing.
1. Clean the area you are going to apply the sticker to throughly (note: Do not
use windex or any other ammonia type cleaner, soap and warm water will do fine)
2. Measure and mark your location first before removing the paper backing from the sticker.
3. Peal away the paper backing of the sticker making sure that all of the sticker peices
stayed attached to the application tape.
4. Place the adhisive side down against the chosen surface and using a credit card or
something similar, rub the surface thoroughly working any bubbles toward the edge.
5. After a couple of minutes you can remove the application tape by pulling it straight
back, be sure that the graphic has stayed on the surface and not the tape.
6. If you see any bubbles you can use a small sewing pin or thumb tack to poke a tiny
hole and then push the bubble out of the graphic with your finger.
TIPS: Wait at least 24 hours before washing the surface the sticker was applied to. Do
Not apply in tempatures above 80 degrees or below 40 degrees.
thats it, enjoy!!