 Back to Search Results | | |
|
This listing has ended. The seller has relisted this item or another one like this. Item:Extralube ZX1 friction eliminator - oil additive -ptfe |
|
|
) 
Print
Report item
| ||||||||||||||
This is a message to all my past loyal customers and potentially new customers. I have been unable to list this item on ebay since about July as I have been a victim of fraud which has led to someone accessing my ebay account and acting in a fraudulant manner. This is reflected in the negative comments that you will see listed. I hope you will be able to see past this very unpleasant situation and purchase from me again. Due to this I will remove the postage and packaging price for the next 10 sales.
ZX1 MICRO OIL METAL TREATMENT The flagship of the ZX1 range is often confused with conventional “additives”. Unique British ZX1 Micro Oil Metal Treatment is a clear particle free fluid that does not contain P.T.F.E therefore it cannot compromise tolerances or clog filters and oilways. It does not mix with the oil as "additives" do, but purely uses a medium, be it oil, or water or fuel, to transport the ZX1 to bare metal surfaces that need treating. · Increase component life and reliability · Improved MPG · Reduced Emissions · Superb cold start protections ZX1 Metal treatment is suitable for all engines and transmission including 2-strokes.
MSDS available upon request.
EXTRALUBE ZX1 250ml bottle is suitable to treat up to 3500cc engine for more information visit www.team-zx1.com Full instruction leaftlet enclosed
ZX1 Micro Oil Metal Treatment is used all over the world in various industries and applications It has been endorsed by Formula 3 and Formula ford , Speedway teams .It is used in Power Boats and Super Yachts and many more - please ask for more details
SUITABLE FOR ALL ENGINES AND TRANSMISSIONS INCLUDING 2 - STROKES. See below FAQ from Team ZX1 Website. How do I use ZX1 in my oil?Remove the oil filler cap and add the required amount (see chart- how much ZX1 do I need to put in my oil - below)
ZX1 is not an “oil additive”, it simply uses existing oil (or other medium) to transport its minute molecules to the metal wearing surfaces.
At normal operating temperature the ZX1 cleans and treats your equipment by impregnating and thermally bonding to the wearing surfaces without compromising any design tolerances. A 15-20 minutes drive completes this simple treatment.
ZX1 can be applied even without having to change your oil with the same instantaneous protection. It loosens any dirt and sludge that has accumulated so then when you next change your oil, that dirt is also drained out of your engine. 4 – Stroke motorcycles are treated in the same way as a car.
ZX1 works with any petrol or diesel engine, turbo or non- turbo.
How much ZX1 Micro Oil Metal Treatment do I need to put in with my oil?
What if add more ZX1 micro oil metal treatment than recommended?Don’t worry if you add too much, any excess will remain in colloidal suspension within your oil until bare metal is exposed and the reserve ZX1 has to go to work. Can I use ZX1 with Synthetic oil?Yes. ZX1 is compatible with all known oils and will not change the characteristics of your favourite oil.
ZX1 only needs a medium to transport it to the wearing surfaces. ZX1 also works in water, should a head gasket failure occur and water contaminates your oil, ZX1 will continue to protect all the internal moving parts. Will I lose the ZX1 if I change my Oil?NO. ZX1 impregnates and thermally bonds to the wearing surfaces, your engine is protected until the ZX1 is worn away. Can I use ZX1 in my manual transmission?Yes, just add ZX1 to your transmission oil up to a ratio of 5% to the oil capacity of the gearbox, this also applies to the differential/final drive.
Can I use ZX1 Micro Oil in my automatic transmission?Yes, ZX1 Micro Oil is suitable for use in automatic transmissions where no metal to metal friction plates are present; most modern automatics have composite fibre to metal plates. We suggest adding ZX1 at a ratio of 2.5% to the oil capacity of the transmission.
Can I use ZX1 Micro Oil in my fuel?Yes, to enhance the upper cylinder lubrication and help reduce harmful emission we suggest the following initial treatment
· Add 10 mls per 10 Litres of fuel.
· Add ZX1 then fill up with fuel
· Make subsequent treatments at 1000 mile intervals using 5ml per 10 Litres of fuel.
This is only a suggestion, you may feel that your engine would benefit from treatment at short intervals; of course any excess will benefit the exhaust system by smoothing the internal surfaces helping exhaust gasses to dissipate quicker.
Can I use ZX1 Micro Oil in my water cooling system?Yes, A couple of capfuls in the cooling system will transport the ZX1 Micro Oil to the metal parts within the water Pump.
How long will a treatment of ZX1 Micro Oil Metal Treatment last?ZX1 has lasted for up to 1000,000 miles, (160,000 kms) however, we recommend retreating every 25,000 miles (40,000 kms) for the optimum long term benefit.
Can I use ZX1 Micro Oil Metal Treatment in my Mazda RX8 Rotary Engine?Yes, ZX1 Micro Oil Metal Treatment will protect the rotary tips which are prone to wear.
My car has Syncromesh - can I still use ZX1 Micro Oil Metal Treatment?We understand your concern for the synchromesh, because of the way in which the rings work, however, it has been found that ZX1 benefits the gearbox and does not compromise the efficiency of the synchromesh. Our racing contacts have informed us that if you are an experienced racing driver used to many different gearboxes you might notice a few milliseconds delay inthe gear change but in the last 10 years that has only been commented on by one very experienced racer who said he would rather protect his gearboxes with ZX1 as the very slight delay did not compromise his performance on the track and since using ZX1 has never suffered a transmission failure whereas, previously it was one of his major mechanical failures in endurance races. Will using ZX1 products affect my warranty?Many manufacturers advise against using oil additives because they change the characteristics of the oil recommended by them for that particular engine. ZX1 Micro Oil is a Metal Treatment, not an oil additive, it does not change the oil, it only uses it as a carrier to get to the wearing surfaces as such we see no reason why your warranty should be affected. Can I use ZX1 Micro Oil Metal Treatment in my "new build engine"?We recommend running in the engine for +/- 500 miles, this should be sufficient for most engines. .
Ask for it by name ZX1!
On 16-Jan-09 at 11:42:41 GMT, seller added the following information:
Check out my other items! | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Questions and answers about this item | ||||
| ||||
Postage and packaging Item location: CRANBROOK, United Kingdom Dispatches to: United Kingdom, Ireland
*The estimated delivery time is based on the seller's dispatch time, the postal service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
| ||||||||||||||
Return policy
| ||
Payment details
| ||||||
 About eBay | Announcements | Safety Centre | Partner Centre | VeRO: Protecting Intellectual Property | Policies | Feedback Forum | Site Map | Help | |
Copyright © 1995-2009 eBay Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the eBay User Agreement and Privacy Policy.
| |