We have a limited stock of these excellent Nato / Mod Surplus tools, they are all good quality, believed to be made by Moore & Wright, but carry no manufacturers stamp. The squares are brand new, some of them are in sealed packets,  some wrapped in grease proof paper and a couple are loose, but all are brand new and appear unused. Some squares have a Nato stock markings on them whilst some remain in their original sealed plastic bag.

Please see our other listings or visit our Ebay shop if you need another size,  if the size square you require is not listed, we   may be sold out, as these squares sell quickly!  especially when you consider that a new 75mm Moore & Wright 400 series  square costs over £20 and these squares are being sold off for a fraction of that price.

Please check out our 100% feedback and our Ebay Shop as we have other items listed that may be of interest

At time of listing we have available in the following size squares: 

25mm     £3.75

50mm     £3.75

75mm     £4.99

100mm   £4.99

150mm   £6.50

Tungsten Carbide Scriber

·         Comfortable to use.

·         Durable hexagonal all-metal construction prevents rolling on bench. 

________________

*** We also have available a 10" (250mm) double ended Engineers Scriber

10" Double ended hardened steel engineers scriber with a knurled & blacked non - slip grip handle for positive and comfortable grip. The scriber has two hardened points, ground to facilitate accurate marking out. One end has a right angled 90° tip for improved access, handy for confined spaces. It also means that it can’t roll off the bench!

__________________________________

2 Drill Gauges

1 x Metric Drill Gauge

1 x Imperial Drill Gauge

Metric gauge measures Drill sizes 1.0mm to 13mm by 0.5mm   

Imperial guage measures Drill sizes 1/16" to 1/2" by 64ths.

A handy tool to keep in your Drill box or hang next to the Lathe

2 Heavy gauges made from polished carbon steel plate 6½" X 2½" (approx) 

I use mine to match bolt sizes with a drill bit and to measure unmarked drill bits, but a brilliant idea came from a customer, who use the drill gauge to make a drill stand. Simply attach the drill gauge to a block of wood and drills the wood in the right size hole and you have an instant drill stand!  when I heard it, I had to try it, and it works brilliantly! they say the simple ideas are the best!

_______

Pin Chuck Set

£4.50

The pin chuck is a very useful accessory that holds drill bits and burrs that are too small to be held securely in a standard capacity

1 mm–13 mm drill chuck. Pin Chucks are equally suitable for use with a lathe or Pillar drill. This Pin chuck set is supplied with three interchangeable collets which are designed to hold small bits ranging in size from 0 up to 3/32. We also stock Micro drill bits and Diamond Burrs if required.

 

To use; Insert a drill bit into the Pin chuck and tighten up. The Pin Chuck shaft is then simply inserted is into your normal drill chuck and then tightened up as normal. This Pin Chuck Set has a standard size ¼ shaft so it will fit all chucks that will accept a standard ¼ shaft.

 

1/4" Shank Pin Chuck and approx 60mm Long, with a Knurled collet cap

• Supplied complete with 3 interchangeable Collets
• Collet capacities, hold a range of bits from  0 to 3/32"     0 to 1/32"      1/32" to 1/16"      1/16" to 3/32".