|
Brand new Original Equipment V8 Rover Engine Mounts.
This listing is for:
A pair of brand new and genuine original equipment bonded Steel/Rubber engine mountings. Suitable for Most V8 2wd applications and made of those situations when the highest quality is expected.
It is becoming so difficult to get essential engine and engine appropriation parts for the Rover V8 engine. However you can be sure we will carry on sourcing all we can, whilst we can.
Will it fit my Car? (mostly only suitable for 2WD not 4WD Rover V8's)
These engine mounting brackets are for the Rover V8 SD1 models from 2.0 to 3.5 including Vitesse and Vanden Plas. They are also widely used by Morgan, TVR's and almost all Kit Cars. Please study the pictures to be sure they are suitable for your application. Why Would I need them.
When was the last time you took a look at your original engine mountings, most commonly they all fall into at least one of the following categories;
Oil contaminated.
Causing far to much flex in the engine mounting, meaning you engine will hang in place at awkward angles. Perhaps causing the exhaust to hit the body or the gearbox to drag on the floor.! Old age
If not Oil contaminated these mounts tend to dry out and become quite rigid, this will cause massive engine vibration through the body of your car and destroy the driving pleasure of your vehicle. As well as causing essential nuts, bolts, clips and other such devices to rattle loose all over your Car. Splits and tears
This is not normally a mainstream problem as the original mounts are extremely robust when mounted in the correct orientation (as they where designed for). However some vehicles, such as most TVR Models use them at an angle and this causes the mounts to tear from the lowest bonded point. This is because these mounts are designed originally to be mounted flat. Thus the torque effect of the engine is across the whole bonded surface rather than in one corner. Service parts availability
If your mounts fail you are not likely to find any replacements easily at your local dealer parts store or specialist. Having a spare pair, either with you or in your garage may save you a lot of hassle and cost in the future. Parts like this item, no longer produced have to be snapped up when available.
This listing is for one pair (2) Genuine Rover V8 Engine mounts only as shown in our high quality picture. Parts range Motto no. 2212
If its at all worth mounting, then its far better to mount it well !!..
Whatever you need for your V8 Engine and much much more then Parts-range is indeed the store
(See our other eBay items) 
If you are paying by Paypal or are located outside of the UK, please refer to payment instructions. Please also remember our prices are inclusive of EEC VAT which can be deducted from your final bid price if you have exemption, or delivery of your item is outside the EEC states.
| 
Track up to 10 items on this computer in 
)
V8 Engine Parts Shop. We are adding more and more items per week, and we are posting the start price in almost all cases with the VAT (17.5%) amount included, rather than on top of (added to) our normal prices, thus offering you the opportunity to save a considerable amount on your parts needs, whilst being secure in the knowledge of our 25 years' experience of the Rover V8 engine and all it involves, plus the considerable eBay status & reputation we already enjoy. We only sell parts that are truly required for the V8 engine, thus the prices are a reflection of the quality and appropriateness of them. We could sell low cost V8 parts of inferior quality, but we chose not to right from the beginning.
