ENGINE TUNING PROGRAM ZENOAH car boat gas rc sikk ETP5

 This program is suitable for experts and beginners. A valuable timesaver for the expert and very easy to use for the less expert engine modifier.

The ETP5 ZENOAH program is unique in that it allows the port timings to be measured from the base of the cylinder.  Normally, measuring some of the port timings and trapped compression ratio on these fixed head engines is relatively difficult, but with this program, the port timings and compression ratio can be found very quickly and accurately, and more importantly when the engine is being modified, the port timings and trapped compression ratio can be found without reassembling the engine, allowing accurate timing changes to be made in a very short time.

WHAT YOU GET.

1. Software and detailed instructions on how to use it. Step by step instructions including diagrams and pictures of the methods used for measuring the port timings and compression ratio of your engine. A degree wheel is not needed.  You need to input some basic engine dimensions and simple measurements taken from the base of the cylinder, and then the software calculates and lists exhaust, transfer, induction port duration, blowdown, geometric and trapped compression ratio. The program shows the effect on port timings and compression ratio of changing the exhaust timing and after removing or adding base gaskets and/or machining the cylinder base.

2.  Complete kit of parts for measuring head volume, and parts needed to show squish clearance.

3.  Full instructions on how to modify your engine for more power and/or better throttling. 

4.  Full instructions on how to fix that engine you have modified and which now doesn't want to throttle or pull away from the shore! 

5. Full backup with any questions answered within 24 hours.