Dual CARBON FIBRE Watch Winder for Hublot NEW

This switch controls “turns per day”. Three types of TPDs are available: 1248, 960 and 672 turns per day.

select this TPD setting. Cup(s) will rotate 52 circles continuously when you turn winder on

for the first time. After that, it will stop and wait for an hour approximately and then it will

rotate 52 times continuously, and so on.

select this TPD setting. Cup(s) will rotate 40 times continuously when you turn the winder

on for the first time. After that, it will stop and wait for an hour approximately and then

rotate 40 times continuously, and so on.

select this TPD setting. Cup(s) will rotate 28 times continuously when you turn the winder

on for the first time. After that, it will stop and wait for an hour approximately and then

rotate 28 times continuously, and so on.

There is a light sensor inside to count the rotations. When the relevant number of rotations

is reached, the winding action will be paused. By means of this sensor, rotations can be

counted exactly as per your settings. Even if the voltage of the batteries drops and the

motor rotations become slower, the sensor will count rotations as usual. As long as the

voltage of the batteries is sufficient to drive the motor, this watchwinder will run according

to the program.

This is a switch that controls the direction of the rotations.

clockwise

counterclockwise

automatic reversing (clockwise first and then counterclockwise)