DVI USB 2.0 Network Cable KVM Switch w/Audio uk3

DVI USB 2.0 Network Cable KVM Switch w/Audio

EM-210CDA

Access and control 2 computers, listen to stereo music and share files-all from a single USB console (keyboard, mouse, audio and Digital monitor, stereo speakers and microphone).

Features:

★Control two DVI enabled computers, listen to music and share files all from a single USB console (USB keyboard, mouse and digital video (DVI-D) monitor)

★"PC Linq2" USB 2.0 software-bridge included-file sharing between computers (Windows only)

★Transfer data between two PCs with speed up to 480Mbps (USB V2.0)

★Innovative built-in cables (1.4m) for a hassle-free set up

★Hot Key switching–supports Windows suite, Linux and Free BSD

★USB keyboard & mouse emulation for error-free booting

★Hot pluggable - add or remove computers without powering off the KVM switch

★Self-powered

★Compact design

★Plug-n-Play monitor support

★Supports Microsoft Intellimouse, Logitech FirstMouse+, MouseMan+, and others

★Superior video resolution-up to 1600x1200@60Hz

★Supports Windows®, Linux®, Free BSD(It does not support Vista.)

Specifications

Model:  EM-210CDA 

Computer Connections: 2 Direct 

Port Selection:  Hotkeys 

Computer ports: 

Monitor: 2 sets: DVI-D male;

Keyboard/ Mouse: 2 sets: USB Type A male;

Audio: 2 sets: audio jack male 

Console ports: 

Monitor: 1 set: DVI-D male;

Keyboard: 1 set: USB Type A female;

Mouse:1 set: USB Type A female; Audio: 1 set: audio jack female 

Resolution:  1600x1200@60Hz 

Dimension(W*D*H) & Weight:  90x34.6x20 mm

Weight: 480g 

Build-in Cable Length:  1.4m/ 4.6ft 

Power Supply:  Bus Powered 

Operation and storage parameters: 

Operating temp: 32 to 104 deg. F (0-40 deg .C);

Storage temp: -4 to 140 deg. F (-20-60 deg. C);

Humidity: 0-80% RH, non-condensing 

Note: You only need to do this additional setup for the computer with the built-in network access. After you finished and restarted Windows, you can plug the other end of the cable to the remote client computer.

Internet Connection Sharing

In order to allow network and Internet access to the remote client PC (without built-in network adapter), you need to first setup the Windows Internet Connection Sharing in your host computer (with built-in network adapter).

Windows XP/2000
1. After you have finished installing the software, you now need to setup the Internet Connection Sharing for the computer with the built-in network access. Click Start-Control Panel-Network Connections.

2. You will find two network devices — one is the Hi-Speed USB-USB Network Adapter and the other one is your built-in network adapter. Right-click the built-in network adapter and click Properties.

3. Inside the Properties window, click the Advanced folder tab. On the Internet Connection Sharing section, click or enable to allow other network users to connect through this computer’s Internet connection. Click OK when done.

4. Check afterwards if your built-in network adapter is already shared.

5. Reboot Windows to activate the settings. After Windows has started properly, plug the other end of the USB Bridge-Network cable to the remote computer. Make sure you have run the Setup program on the remote computer as well. Note that you don’t need to do the above additional settings for the remote computer.

6. Check the remote client computer if the host computer is detected and if the network and Internet access if functioning

Hot Key Switching

Controlling your computers, simply press the “Scroll Lock” key twice within two seconds to switch the KVM focus to the other computer.