| | |
|
This listing has ended. The seller has relisted this item or another one like this. Item:Cisco SFS7008P TS-270 Topspin InfiniBand 4x LIM, 4xSFM |
|
|
This is a Topspin TS270 / Cisco SFS7008P IB Server Switch, 48 InfiniBand ports 1- Topspin / Cisco TS-270 SFS-7008P Chassis 4- SFS-7008P-SFM-K9 SFS 7008P Switch Fabric Module, with management 4- SFS-X7008P-04X12 Cisco SFS 7008P InfiniBand 4X 12-Powered-Port Line Card with 12 powered ports of 10-Gbps 4X InfiniBand 2- High Speed Fans 1- AC Power Supply Power cable and console cable included. This unit is in excellent condition. Unit is Topspin Branded. Cisco Bought Topspin in 2005. I will include a 30 day Hardware Warranty. Let me know if you have any questions. M-F 9:00 - 5:00 PST (503) 391-8191 x 118 Here is a Link to Cisco's Website about this : http://www.cisco.com/en/US/prod/collateral/ps6418/ps6419/ps6421/product_data_sheet0900aecd8029fde9.html Here is the Boot up: ENET Speed is 100 Mbps - FULL duplex connection Boot Regular Image from Disk Partition 0: boot sig=0x1c80d493 Loading: ++++++++++++++++++++++++++++++++++++++++[ 1272K] ++++++++++++++++++++++++++++++++++++++++[ 2552K] ++++++++++++++++++++++++++++++++++++++++[ 3832K] ++++++++++++++++++++++++++++++++++++++++[ 5112K] ++++++++++++++++++++++++++++++++++++++++[ 6392K] ++++++++++++++++++++++++++++++++++++++++[ 7672K] ++++++++++++++++++ [ Done ] ## Booting image at 00200000 ... Verifying Checksum ... OK Uncompressing Multi-File Image ... OK †Linux version 2.4.19-rc3 (releng@borg(TopspinOS 2.3.0 releng #222 06/09/2005 16 :49:24)) (gcc version 2.95.3 20010315 (release)) #12 Thu Jun 9 17:19:47 PDT 2005 Topspin 270 Fabric Switch Card Installing knfsd (copyright (C) 1996 okir@monad.swb.de). iic_ibmocp_init: IBM on-chip iic adapter module 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. EXT2-fs warning: checktime reached, running e2fsck is recommended hostname. Mounting local filesystems... Partition check: fla: fla1 fla2 flb: flb1 EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3-fs: recovery complete. Starting syslogd klogd. Starting portmap. Starting ntpd. Starting sshd. Starting inetd. Starting crond. Starting software TopspinOS-2.3.0/build222. Start Controller module. IBSM_PATH is now ../ppc440_270sc Check for needed config files and software. checking FPGA firmware - 21:01:47 Checking FPGA Status from PPCBoot ... FPGA Sanity Checking ... Sanity Check passed Update Checking ... FPGA rev = b1 File rev = b1 No update needed. Done. checking Anafa2 microcode - 21:01:48 Reset Anafa2 0 Anafa2 Reset Done Reset Anafa2 1 Anafa2 Reset Done anafa2_tsrev_check: /topspin/images/boot/exe/arch/270_a2_tsversion Anafa2Init: ts version matches: 004 = 004 Anafa2Init: filename=/topspin/images/boot/exe/arch/a2fw-00050122da-270_55.bin tmpname=/topspin/images/boot/exe/arch/a2fw-00050122da-270_55.bin Anafa2Init: Anafa0 fw 00050122da matches anafa2_tsrev_check: /topspin/images/boot/exe/arch/270_a2_tsversion Anafa2Init: ts version matches: 004 = 004 Anafa2Init: filename=/topspin/images/boot/exe/arch/a2fw-00050122da-270_55.bin tmpname=/topspin/images/boot/exe/arch/a2fw-00050122da-270_55.bin Anafa2Init: Anafa1 fw 00050122da matches Anafa firmware 00050122da matches firmware file a2fw-00050122da-270_55.bin Anafa2 microcode update OK Anafa2 microcode done - 21:01:57 checking PIC firmware - 21:01:57 Tue Jan 27 21:01:57 2009[HW][pic.c:2041]: Checking hex file format and version.. . Tue Jan 27 21:01:57 2009[HW][pic.c:2110]: Vendor string in hex file = 02010406 Tue Jan 27 21:01:57 2009[HW][pic.c:3620]: PIC: PIC: Slot 15: Microcode version: 201406: PASSED PIC firmware done - 21:01:58 eth0: IBM EMAC: link up, 100 Mbps Full Duplex, auto-negotiation completed. eth0: IBM EMAC: MAC 00:05:ad:02:a1:12. Added VLAN with VID == 100 to IF -:eth0:- Added VLAN with VID == 100 to IF -:eth1:- eth0: IBM EMAC: link up, 100 Mbps Full Duplex, auto-negotiation completed. eth0: IBM EMAC: MAC 00:05:ad:02:a1:12. eth0.100: add 01:00:5e:00:00:01 mcast address to master interface connection from 1.1.1.12, port 1025 Running POST ... POST: CORE in Slot 11: (SUMMIT): PASSED POST: CORE in Slot 11: (FPGA: Revision = 0xb1): PASSED POST: CORE in Slot 11: (ETH POST): PASSED POST: CORE in Slot 11: (SEEPROM BACKUP): PASSED POST: CORE in Slot 11: (SEEPROM DATALOG): PASSED POST: CORE in Slot 11: (VPD): PASSED POST: CORE in Slot 11: (MGMT IO slot 15): PASSED POST: CORE in Slot 11: (ID MODULE): PASSED POST: CORE in Slot 11: (FAN 1 Slot 20): PASSED POST: CORE in Slot 11: (FAN 2 Slot 20): PASSED POST: CORE in Slot 11: (PS Slot 18): PASSED POST: CORE in Slot 11: (LIM: Slot 1): PASSED POST: CORE in Slot 11: (LIM: Slot 2): PASSED POST: CORE in Slot 11: (LIM: Slot 3): PASSED POST: CORE in Slot 11: (LIM: Slot 4): PASSED GUID1=0005AD0000018870 GUID2=0005AD0000018871 SI_GUID=0005AD040b01886C POST: Anafa2 Checking firmware boot syndrome... POST: Anafa2 Checking firmware boot syndrome... POST: Anafa2 firmware check: PASSED MODULE_LIST is ts_kcompat.o ts_kernel_services.o ts_kernel_poll.o ts_ib_packet_l ib.o ts_ib_core.o ts_ib_header.o ts_ib_anafa2.o ts_ib_mad.o ts_ib_client_query.o ts_ib_sa_client.o ts_ib_useraccess.o ts_ipoib.o ts_watchdog.o Load ts_kcompat.o. Load ts_kernel_services.o. Load ts_kernel_poll.o. Load ts_ib_packet_lib.o. Load ts_ib_core.o. Load ts_ib_header.o. Load ts_ib_anafa2.o. Load ts_ib_mad.o. Load ts_ib_client_query.o. Load ts_ib_sa_client.o. Load ts_ib_useraccess.o. Load ts_ipoib.o. ib0: anafa2 port 0 ts0: anafa2 port 0 ib1: anafa2 port 0 ts1: anafa2 port 0 Load ts_watchdog.o. Register TS Watchdog, timeout = 30 Creating character special files ts_ua[0-6]. Getting chassis-id, slot-id, and card-type information starting to check firmware/microcode - 21:02:11 done checking firmware/microcode - 21:02:11 card_startup.x : ts_system("/sbin/ifconfig eth1 down") completed card_startup.x : ts_system("/sbin/ifconfig eth0 up") completed card_startup.x : ts_system("/sbin/ifconfig eth0.100 1.1.1.11 broadcast 1.1.1.255 netmask 255.255.255.0 mtu 1496 up") completed card_startup.x : ts_system("/sbin/arping -U -q -c 2 -I eth0.100 1.1.1.11") comp leted card_startup.x : slot 11 is the master card_startup.x : chassis-type=TS270, chassis-id=5ad000001886c, slot-id=11, card- type=controllerFabric12x card_startup.x : successfully started-up card in I2C mode(hot-standby) card_startup.x : using 'product-info.270.topspin' to initialize the system chassis-type is TS270, chassis-id is 5ad000001886c, slot 11 is controllerFabric1 2x PROCESS_LIST is diag_agent.x notifier.x watchd_mgr.x ib_port_agent.x ts_sma.x ib _mgr.x chassis_mgr.x port_mgr.x diag_mgr.x snmp_agent.x activate the CLI for this Core slot Removing old webui files Installing webui files Start diag_agent.x -11 -controllerFabric12x in background. Start notifier.x in background. Start watchd_mgr.x -11 -controllerFabric12x in background. Start ib_port_agent.x -11 in background. Start notifier.x in background. Start watchd_mgr.x -11 -controllerFabric12x in background. Start ib_port_agent.x -11 in background. Start ts_sma.x -11 in background. Start ib_mgr.x in background. Start chassis_mgr.x in background Changing password for root Password changed. chassis_mgr.x : ts_system("/sbin/ifconfig eth1 down") completed chassis_mgr.x : ts_system("/sbin/ifconfig eth0 up") completed chassis_mgr.x : ts_system("/sbin/ifconfig eth0.100 1.1.1.11 broadcast 1.1.1.255 netmask 255.255.255.0 mtu 1496 up") completed chassis_mgr.x : ts_system("/sbin/arping -U -q -c 2 -I eth0.100 1.1.1.11") compl eted [INFO] : card 1 is inserted - type=ib12port4xTX [INFO] : card 2 is inserted - type=ib12port4xTX [INFO] : card 3 is inserted - type=ib12port4xTX [INFO] : card 4 is inserted - type=ib12port4xTX [INFO] : card 9 is inserted - type=fabric12x Start port_mgr.x in background [INFO] : card 10 is inserted - type=fabric12x [INFO] : card 11 is inserted - type=controllerFabric12x [INFO] : card 12 is inserted - type=controllerFabric12x [INFO] : card 15 is inserted - type=mgmtIO [INFO] : card 17 is inserted - type=idModule Start diag_mgr.x in background. Start snmp_agent.x in background Pause to let processes finish initializing. Starting CLI. Starting CLI (Hot Standby - Master) startup-config file missing. Start with factory default configuration. Login:admin Password: xxxxx Topspin-270> en Topspin-270# Topspin-270# show ver ================================================================================ System Version Information ================================================================================ system-version : Topspin-270 TopspinOS 2.3.0 releng #222 06/09/2005 1 6:49:24 contact : support@topspin.com name : Topspin-270 location : 515 Ellis Street, Mountain View, CA 94043 rack-uid : 0x0 up-time : 0(d):0(h):3(m):4(s) last-change : none last-config-save : none action : none result : none sys-sync-state : complete oper-mode : normal Topspin-270# Topspin-270# show fan ================================================================================ Fan Information ================================================================================ fan oper-status speed(%) -------------------------------------------------------------------------------- 1 up 73 2 up 72 ================================================================================ Fan Seeprom ================================================================================ product pca pca fru fan serial-number serial-number number number -------------------------------------------------------------------------------- 1 MX3060300460 C2052700401 95-00039-01 98-00234-01 2 MX3060300460 C2052700401 95-00039-01 98-00234-01 Topspin-270# show card ================================================================================ Card Information ================================================================================ admin oper admin oper oper slot type type status status code -------------------------------------------------------------------------------- 1 ib12port4xTX ib12port4xTX up up normal 2 ib12port4xTX ib12port4xTX up up normal 3 ib12port4xTX ib12port4xTX up up normal 4 ib12port4xTX ib12port4xTX up up normal 9 fabric12x fabric12x up up normal 10 fabric12x fabric12x up up normal 11* controllerFabric12x controllerFabric12x up up normal 12 controllerFabric12x controllerFabric12x up up standby 15 mgmtIO mgmtIO up up normal 17 idModule idModule up up normal ================================================================================ Card Boot Information ================================================================================ boot boot boot slot stage status image -------------------------------------------------------------------------------- 1 none none 2 none none 3 none none 4 none none 9 done success TopspinOS-2.3.0/build222 10 done success TopspinOS-2.3.0/build222 11 done success TopspinOS-2.3.0/build222 12 done success TopspinOS-2.3.0/build222 15 none none 17 none none ================================================================================ Card Seeprom ================================================================================ product pca pca fru slot serial-number serial-number number number -------------------------------------------------------------------------------- 1 MX3060400003 C3055100126 95-00037-01 98-00231-01 2 MX3060400026 C3055100115 95-00037-01 98-00231-01 3 MX3060400005 C3055100107 95-00037-01 98-00231-01 4 MX3060400033 C3055100123 95-00037-01 98-00231-01 9 MX3060300480 C2052900138 95-00036-01 98-00232-01 10 MX3060300484 C2052900148 95-00036-01 98-00232-01 11 MX3060300487 C2052900068 95-00036-01 98-00232-01 12 MX3060300486 C2052900163 95-00036-01 98-00232-01 15 MX3060300425 C2052900278 95-00033-01 98-00235-01 17 MX3055200067 C3054500035 95-00034-01 98-00236-01 Topspin-270# Topspin-270# show card-inventory ================================================================================ Card Resource/Inventory Information ================================================================================ slot-id : 9 used-memory : 9876 (kbytes) free-memory : 117876 (kbytes) used-disk-space : 21709 (kbytes) free-disk-space : 80670 (kbytes) last-image-source : TopspinOS-2.3.0/build222 primary-image-source : TopspinOS-2.3.0/build222 image : TopspinOS-2.3.0/build222 cpu-descr : PPC 440GP Rev. C - Rev 4.129 (pvr 4012 0481) fpga-firmware-rev : b1 ib-firmware-rev : 00050122da (hw-rev b924 a1) slot-id : 10 used-memory : 9880 (kbytes) free-memory : 117872 (kbytes) used-disk-space : 21708 (kbytes) free-disk-space : 80671 (kbytes) last-image-source : TopspinOS-2.3.0/build222 primary-image-source : TopspinOS-2.3.0/build222 image : TopspinOS-2.3.0/build222 cpu-descr : PPC 440GP Rev. C - Rev 4.129 (pvr 4012 0481) fpga-firmware-rev : b1 ib-firmware-rev : 00050122da (hw-rev b924 a1) slot-id : 11 used-memory : 20096 (kbytes) free-memory : 107656 (kbytes) used-disk-space : 22055 (kbytes) free-disk-space : 80324 (kbytes) last-image-source : TopspinOS-2.3.0/build222 primary-image-source : TopspinOS-2.3.0/build222 image : TopspinOS-2.3.0/build222 cpu-descr : PPC 440GP Rev. C - Rev 4.129 (pvr 4012 0481) fpga-firmware-rev : b1 ib-firmware-rev : 00050122da (hw-rev b924 a1) slot-id : 12 used-memory : 18804 (kbytes) free-memory : 108948 (kbytes) used-disk-space : 21855 (kbytes) free-disk-space : 80524 (kbytes) last-image-source : TopspinOS-2.3.0/build222 primary-image-source : TopspinOS-2.3.0/build222 image : TopspinOS-2.3.0/build222 cpu-descr : PPC 440GP Rev. C - Rev 4.129 (pvr 4012 0481) fpga-firmware-rev : b1 ib-firmware-rev : 00050122da (hw-rev b924 a1) slot-id : 15 used-memory : 0 (kbytes) free-memory : 0 (kbytes) used-disk-space : 0 (kbytes) free-disk-space : 0 (kbytes) primary-image-source : image : pic-firmware-rev : 201406 Topspin-270#
|
| ||
Return policy
| |
Payment details
Seller's payment instructions | ||||||