pixfirewall> sh ver
Cisco PIX Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(5)
Compiled on Thu 07-Aug-08 19:42 by builders
System image file is "flash:/pix804.bin"
Config file at boot was "startup-config"
pixfirewall up 1 min 34 secs
Hardware: PIX-525, 256 MB RAM, CPU Pentium III 600 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : address is 0017.94aa.dc72, irq 10
1: Ext: Ethernet1 : address is 0017.94aa.dc73, irq 11
2: Ext: Ethernet2 : address is 0050.8b6b.6ecf, irq 10
3: Ext: Ethernet3 : address is 0050.8b6b.63e2, irq 5
4: Ext: Ethernet4 : address is 000d.8811.5b60, irq 11
5: Ext: Ethernet5 : address is 000d.8811.5b61, irq 10
6: Ext: Ethernet6 : address is 000d.8811.5b62, irq 9
7: Ext: Ethernet7 : address is 000d.8811.5b63, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 10
Maximum VLANs : 100
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has an Unrestricted (UR) license.
Serial Number: 810140xxx
Running Activation Key: 0x5705d65e 0x2019fbe8 0x9c71b530 0xb5c42808 0x0c2a0197
Configuration has not been modified since last system restart.
pixfirewall>