Chevelle SS
The Chevelle SS represented Chevrolet's entry into the muscle car battle. Early 1964 and 1965 Chevelles had a Malibu SS badge on the rear quarter panel (the sought-after Z16 option had the emblem on the front fender, where 201 Malibu SS396s were produced); after 1965, the Malibu SS badging disappeared except for those sold in Canada. The Chevelle SS, which became a regular series of its own in 1966 called the SS396, was the high performance version and had its own line of engines and performance equipment. The performance engines available included 396 CID V8s – rated at 325, 350 and 375 hp (280 kW) respectively (the mid horsepower 396 was rated at 360 hp (270 kW) for 1966 only and 350 hp (260 kW) thereafter). The SS396 series only lasted three years from 1966 through 1968 before being relegated to an option status just like air conditioning or a radio. The 1966 and 1967 model years also saw the limited run of the 'strut back' two-door sport coupe with its own model number, 17, as opposed to model number 37 used on previous and later two-door sport coupes. The 1968 model year was the first and only year of the SS396 El Camino with its own series/model identification of 13880. Almost all the goodies (big block engine, suspension, transmission options, etc.) of the SS396 could be ordered on the 1966 and 1967 El Camino but, sadly, the SS396 series El Camino was not available until (and only in) the 1968 model year. As with the 300 Deluxe and Malibu in 1969 and only the Malibu from 1970 to 1972, the SS option could be ordered in the El Camino as well.
Two prototype Z16 Chevelles were built at the Baltimore plant and all regular production Z16 Chevelles were built at the Kansas City plant. Whether these two prototypes and the one reported convertible are included in this 201 figure isn't known. The one convertible was reportedly special built for Chevy General Manager Semon "Bunkie" Knudsen but is commonly called the 201st Z16 Chevelle and is commonly understood to have been destroyed. The original Z16 convertible supposedly surfaced in Art Astor's famous auto collection but has been proven to be a fake.
The Z-16 option included a convertible boxed frame, a narrowed rear axle and brake assemblies from the contemporary Impala, heavy-duty suspension, plus virtually all Chevelle comfort and convenience options. The Z-16 standard big-block 396 Turbo-Jet V8 came only with the Muncie wide-ratio four-speed manual transmission. The rear of the Z-16 had a unique black and chrome trim panel which framed untrimmed Chevelle 300-style taillights (Malibu and Malibu SS models had bright metal trim attached to the lenses).
For Chevelle enthusiasts who wanted a high-performance mid-sized car but with a hot small-block V8, all Chevelle models (not including the Z16 of course) in 1965 were available with a 350-horsepower 327-cubic-inch V8 (option code L79) in 1965. That same engine was also offered in downrated form at 325 hp (242 kW), in all 1967 and 1968 models not including of course the SS396 which was tied solely to the 396 engines.
1966 saw a complete restyle of the Chevelle on the old frame. The new body reflected the "Coke bottle" body shape that became the fad for American cars in the mid-1960s. Bulging rear fender lines and a "flying buttress" roofline (where the rear window was recessed into the "C" pillar) were highlights of the '66 hardtops, shared with other GM "A" body models. The SS396 became a separate model, and the only Super Sport available. It was produced as a regular production model, and quite a few were sold. 1967 saw a slight restyle of the '66 body, but an entire host of new safety equipment became standard that year, making the '67 a much safer car to be in the event of a collision. The SS396 continued as the only Super Sport model, in both Sport Coupe and Convertible body styles.
For 1968, a new body style emphasized the "Coke bottle" look even more, and a semi-fastback roofline for hardtop coupes became extremely popular. New Federal safety-mandated equipment included side marker lights on each fender, as well as shoulder belts for outboard front seat occupants on cars built after December 1, 1967. This explains why some '68s had shoulder belts, and some (early-production cars) didn't have them. All '68s had anchors for the belts, however. Manaul transmission cars got GM's "Air Injection Reactor (A.I.R)" smog pump, which added complexity under the hood.
For the 1969 model year, the SS396 series (138xx) was dropped and the Super Sport became a performance option. In 1969 the SS option could be ordered on the 300 Deluxe 2-door Sport Coupe (13437) and 2-door sedan (13427) as well as the Malibu 2-door Sport Coupe (13637), convertible (13667), and El Camino (13680). All '69 Chevelles also got a new locking steering column, one year ahead of the Federal requirement. Headrests, required for all cars sold in the US after January 1, 1969, were installed on all '69 GM cars, but on cars sold before the law went to effect had the option of deleting them. In 1970 the SS option was limited to the Malibu series (2-door Sport Coupe, convertible, and El Camino). In both 1969 and 1970 the SS option included the 396/402 as the base engine keeping the option alive as a performance-oriented choice. This changed in 1971 when the SS option could be ordered with any optional V8 and became more of a dress-up option than a performance option.
Prior to 1970, GM had a restriction stating that no mid-size car could have an engine with a displacement over 400 CID. Don Yenko a Chevy dealer outside Pittsburgh, PA discovered a way to get around that edict. Don used the Central Office Production Order system, which normally filled special-equipment fleet orders, to create a special COPO that included the L-72 427 cubic inch 425 horsepower engine and the needed drive train upgrades. A few other dealers ordered the package that Yenko created and sold them as their own supercars. (Berger, Sunico, etc)
In 1970 GM dropped the displacement rule, and that was when the bigger engines were available as regular production options, resulting the addition of an SS454 line option to the existing SS396 option. The 396 engine actually displaced 402 cubic inches due to the factory having to overbore the blocks .030" due to machining issues during production. Most notable was the 454 CID LS5 V8 rated at 360 hp (270 kW)(rated 390 hp in Corvettes) and the LS6 at 450 hp (340 kW). The LS6, with 450 hp (340 kW) and 500 ft·lbf (680 N·m) of torque, would rocket the Chevelle through the 1/4 mile in low to mid-13 second times at 105 to 108 mph (174 km/h). In fact, the stock LS6 at 450 hp (340 kW) tied the 1966 Corvette early production 427/450hp as the highest horsepower engines offered by any manufacturer during the muscle car era. There were more powerful engines offered by GM during those years but they were underrated to keep the less savvy buyers from ordering them for street use. The ZL-1 and L-88 427s both were rated at 430 hp but produced well over 500 hp in stock configurations. They were "race only" engines and very very few were ever installed in production cars. Most were ordered by racers that had factory connections or sold over the parts counter.
Back to Search Results
) 
littlemodels2000
Print
Report item
