Build a digital single to three-phase converter 4-24 kW

Plans and tips to build digital single to three-phase converters 4kW to 24kW (5 to 30 hp)

Phase converters are used in metal or woodworking workshops, in meat processing, in bakeries, on dairy farms.
They run one or many three-phase machines on single phase power

Rotary converters all have some known drawbacks:

- The generated phase voltage varies with changing loads.
- Motors and machines cannot develop their full nameplate power.
- CNC machines, plasma cutters, VSDs disconnect from power unless a converter is heavily oversized.
- Motors start and accelerate sluggishly

Change this, build a digital single to three-phase converter with advanced features:

* Phase voltages are digitally balanced to within 3%. Motors develop their full nameplate power.
* Voltages remain stable at all loads. CNC, VFDs, welders work well without the need to oversize anything.
* No contacts, no electrolytic capacitors are used. This converter will last.
* Soft solid-state capacitor switching at zero crossings. Waveforms are perfectly sinusoidal.
* Motors and machines accelerate much faster than with any other converter.
* No harmonics, no EMC is produced. Power quality and emissions meet all standards.
* No restrictions: All loads are allowed (motors, electronics, heaters, transformers, rectifiers...)
* Same specifications as Booster converters in USA, Australia and Digi-Phase in the UK

Assemble the parts inside a ventilated box.
Your electrician will finish the wiring

Details:
Install a standard three-phase motor on soft mounts outside or inside a box.
Install standard metalized polypropylene capacitors.
Install the digital single to three-phase Booster controller

Parts, controllers, complete kits, support and even complete solutions are available by several sources in the US, UK, Australia and New Zealand.
Sources and parts and other details are all published (google them) and also listed in the supplied documents

Installing the components is easy.
Reading the wiring diagrams requires electrical knowledge

You will receive:
Wiring diagrams for nine different converters 4kW to 24kW (5 to 30HP).
Part specifications, building instructions, tips.
16 pages. No movies, no books, not the internal circuitry of the digital controllers

You will still need:
A digital controller, a standard motor, standard capacitors, appliances wire, connectors, a safe enclosure
The support of an electrician if you are not one.
Money back guarantee if you are not satisfied with plans or instructions or the performance of your new converter

Supply voltage of your new Booster converter will be single phase 240V

Three-phase output will be:
in US and Canada: 3x 240V 60Hz. in UK, Ireland, Australasia: 3x 415V 50Hz