BARK BUSTER Stops Dogs Barking - Training Obedience Aid

• Stops nuisance dog barking
• Weatherproof cover for outdoor use
• Sound sensor detects bark noise
• Mains powered with 30ft cord

Good Ideas BarkBuster Ultrasonic Dog Barking Repeller - ASC-250 (TM548)

Stop nuisance barking with Bark Buster, the humane solution to noisy dogs.

This ultrasonic training device emits a high pitched sound that is generally only audible to animals when it detects the sound of dogs barking. The specially designed signal is an effective deterrent that stops dogs from barking.

Ideal for obedience training
Bark Buster can be used in conjunction with your own voice commands to help your pet associate your command with the bark prevention sound.

Perfect for your neighbour's noisy dogs!
This wall mountable, weatherproof device is ideal for use with your own dog, or for a neighbour's dog. Provides 24-hour protection from annoying noise.

Note that obstructions like buildings, fences and foliage may block the transmission of sound either partially or completely. The unit works best where there is a 'line of sight' between the unit and the target area.

Auto activation, or continual operation
Bark Buster allows you to choose continuous mode, or sound-activated mode using the built-in microphone which triggers an ultrasonic tone when barking is detected. When the barking stops, the tone stops automatically when using microphone mode.

Frequency adjustment for maximum benefit
The output tone is switchable, which allows you to select the output pitch with greatest effectiveness.

The mains powered unit has very low power consumption (12 watts) and is supplied with UK mains adaptor, swivel bracket for wall hanging, weather proof cover and detailed user instructions.

Where should I position Bark Buster?
Bark Buster can be installed anywhere as long as it points towards the area that needs protection. Buildings and foliage may block the unit's signals, so try to give it a 'line of sight' into the required areas. Covers an oval shape up to 15m (50ft) left to right; up to 24m (80ft) in front. Position high enough to 'see over' plants and other obstructions, and adjust direction of angle bracket to suit.

What's in the box?
• BarkBuster ultrasonic bark repeller;
• Weatherproof cover;
• 240V AC mains adaptor with British 3-pin plug and 9.1m (30ft) cable;
• Detailed operating instructions.

Dimensions:
• Width 11cm (4.25"); Height 17cm (6.75"); Depth 5cm (2").
• Mains adaptor cable: 9.1m (30ft) long.
• Output pattern: Oval shape up to 15m (50ft) left to right; up to 24m (80ft) in front. Overall coverage up to 4,000 sq. ft. with line of sight.

Technical information:
• The mains adaptor produces an output of 12V DC, 500mA, 6VA, centre pin positive. Consumption 12W.
• Fixing centres of wall bracket: 7cm (2.75").

Guaranteed for 2 years. Harmless to fish and birds.

Please note: Sound unit is not suitable for placement indoors nor in confined areas. If you plan to leave the unit switched on continually, please consider animal's wellbeing before selecting continuous mode. Wall mountable unit is weatherproof only when grille cover is in place. The 12V DC plug and cable may be used outdoors, but the mains plug must only be connected to an indoor electrical outlet, or contained in a weatherproof housing if using an outdoor mains outlet.