AccuMate 6V or 12V Trickle Charger
The AccuMate is designed to automatically charge and monitor batteries with no danger of over-charging regardless of time.
The
AccuMate is suitable for all 6 and 12V lead acid batteries from 4Ah to
75Ah, making it perfect for owners of older vehicles which are not used
on a daily basis.
Operation of the AccuMate is completely
automatic. It uses a 1.2A constant current charge as the main stage,
while monitoring the battery voltage.
When this reaches a
pre-set cut off point, it then switches to an intermediate constant
voltage 'float charge'. Only when the AccuMate has detected that the
battery is properly charged, will it switch to the final stage for
correct long-term battery maintenance, and indicate a green LED. If at
any time the AccuMate detects that the battery has discharged, it will
automatically revert to the constant current stage.
Features:
Very
easy to use - Select 6V or 12V charging output according to battery
type and then connect to battery and mains power - the rest is fully
automatic.
Comprehensive and intelligent LED indications - AC
power on; battery voltage selection; wrong polarity connection;
charging; and maintain (charge completed). If a sulphated or neglected
battery is unable to draw at least 200mA, the indication will not
progress past the yellow charging LED. The green maintain (charge
completed) LED means exactly that, charging has been completed.
No
risk of overcharging - AccuMate\'s special monitoring circuits vary and
regulate the current and voltage exactly according to the battery
manufacturer’s specifications.
Safe and foolproof - No worries
about wrong connections, accidentally shorting the battery clamps or
blowing fuses - automatic protection even suppresses sparks.
Compact,
yet powerful - Will safely charge 12V batteries discharged to as low as
3V (1.5V for 6V batteries) other chargers are unable to. Charging time
equal to a 3 Amp conventional charger despite the compact size.
No risk of overheating - Automatic temperature control regulates charge current to a safe level in hot or enclosed conditions.
Advanced 4-step charging program - 6V values in brackets.
Directions for use:
No fuss, no complicated buttons & switches to worry about,
plenty of idiot-proofing, just plug in and forget about it.