7m Cable for Beolab Bang & Olufsen B&O Powerlink Mark 3

This listing is for a high quality audiophile cable to allow you to connect Beolab active loudspeakers (models without displays) to your Bang and Olufsen hifi system or television. The cable in this listing is seven metres long, but it can be specified in any other length from 50cm to 100 metres - if you don't see what you need, please ask us so that we can create an eBay listing for the cable you require!  This cable will fit almost all B&O audio systems and TV’s manufactured since 1990 (ie. those with 8 pin Powerlink output sockets) – if you are in any doubt, please ask!

We take pride in our customer service and our excellent feedback record - we will be glad to offer you any help and advice you require to ensure that you find the correct cables for your needs.  We believe that we have one of the fairest return policies on eBay and we are proud to offer you our unique 100% Satisfaction Guarantee - see below for full details!

High quality, shielded plugs with metal inner cases are used on our cables in preference to the cheap, unshielded plastic plugs that you will see on many other companies’ cables. Our shielded plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure.

This cable is suitable for all of following models from the current range of Bang and Olufsen Beolab active loudspeakers and most past models, including:-

• Beolab 1

• Beolab 2

• Beolab 3

• Beolab 4

• Beolab 7.1

• Beolab 7.2

• Beolab 9

• Beolab 10

• Beolab 2500

• Beolab 4000

• Beolab 6000

• Beolab 8000

For older Beolab speakers that have displays (such as Beolab 3000, 3500, 4500, 5000 and Penta) and Beolab 5, please see our listings for Powerlink mark 2 compatible cables by clicking on the red shop door logo near the top of this page.

Cable specifications:-

• Screened High-Purity Copper cable with Black outer sheath

• Audio and Signal conductors: 7 x 0.1mm multi-stranded high purity copper

• Screening conductor: 72 x 0.1mm multi-stranded high purity copper

• Metal screened 8-pin DIN plugs with black plastic outer cover

• Overall Cable Diameter: 4mm approx (slim and unobtrusive!)

• “Speaker On” and “Voltage Reference” signal wires are connected for use with all current Beolab loudspeakers except Beolab 5

Please note: Very few other companies' cables use shielded cable and plugs. Even fewer use high purity, stranded copper for optimum signal quality. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All of our cables are designed and tested by a Graduate Electronics Engineer with over 20 years experience of B&O equipment.

If you require WHITE cables, please see our eBay listings for fully-wired Mark.2 Powerlink compatible cables, which will work with any Powerlink-equipped Beolab speakers and which are available is either BLACK or WHITE.  The Mark.3 cables in this listing are only available in BLACK.  Thanks for looking!

Worldwide Priority Shipping is FREE for all of our cables!

Or you can collect in person from our Leicestershire workshop if you prefer.

Please note that we are currently unable to accept payments from, or ship items to, either Nigeria or Antarctica. We trust that this will not inconvenience too many of our customers!