ROXSEN

Detail Description This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously , such as Nikon flash. This principal works by one transmitter and one receiver. The signal transmitter can transmit the wireless signal that is being encoded, the receive work with a CR2/3V battery, and decode with a microprocessor. Package included: as above picture 1 x Transmitter 1 x Receiver 1 x X sync wire cable 1 x Receiver battery ( CR2/3V Lithium)   Max available distance: 30M   User Guide:  1. Make sure the transmitter and the receiver are at the SAME control channel. On the transmitter, the blue DIP switch of channel setting is on bottom side; on the receiver, the channel setting switch is inside the battery compartment. By channel setting, you can group the flash equipment into channel 1, 2, 3 or 4, and then switch the transmitter into channel 1, 2, 3 or 4 to control the different lighting group. 2. Insert the X Sync Cord into the PC terminal of the receiver, insert the 1/4" (6mm) or 1/8" (3mm) phone jack plug into the jack of your flash equipment, then switch on the receiver. 3. Press the TEST button of the transmitter to confirm operation of the flash equipment in the chosen configuration before taking photography. 4. Connect the transmitter with your light meter by the X Sync Cord. Press the metering button of the light meter to meter light. Please make sure the shutter speed is not more than the max Sync speed of your camera. Adjust the light output of the flash equipment if needed, then meter light again. Disconnect the transmitter with the light meter. 5. Mount the transmitter on the camera hot shoe. If your camera does not have a hot shoe but have a PC terminal, then connect the transmitter with the camera by the X Sync Cord. Feel annoying by connect and disconnect the transmitter with the light meter or the camera? We strongly recommend you buy an additional transmitter. Thus you can have one transmitter for the light meter and on for the camera! 6. Set the camera into M mode, and then set the desired shutter speed and metered aperture value. Now you can trigger the flash equipment by press the shuttle release button of the camera to take pictures. it is not fit for canon 580ex, 430ex, 550ex, flash extra receiver is gbp 8 included postatge fee

If you have any questions, please e-mail us.

Terms & Condition

1. All products are shipped from Hong Kong directly.

2. We will ship our products by courier, please allow 3-7 business days for delivery after payment have been cleared.

3. Failure to pay within 7 days will result in the posting of a Non-Paying Bidder Alert and negative feedback.

4. All products will ship as a gift in order to minimize the import duties.

5. Buyer should be bear the risk of postage and we will only refund or resent the item for those buyer who brought insurance, please buy the insurance to eliminate the risk.

6. Besides, tracking number will be provided if you purchase the insurance and you can check the delivery status.

Return Policy

1. All sales are final.  When you receive your package, promptly check the items to make sure the items are intact. We will credit or exchange for DEFECTIVE items only. Or if the product was sent to you in error by our staff.

2. Roxsen is not responsible for lost or stolen packages. We recommend that you keep proper proof of delivery.

3. All Shipping and Handling cost will not be refunded.

4. If product are not found defective, buyer need to bear the postage cost for posting back the item(s), otherwise, returned product will not post back to buyer until the shipping cost is received.

Warranty Policy

• Warranty only apply on the stated warranty period products.

• Warranty is void if the products has been improperly charged, installed or misused in any way, or if the label and/or bar coded warranty label has been removed or tampered with.

• Where applicable, all requests for warranty returns must be accompanied by a proof of purchase and be made through the dealer or outlet where the products was originally purchased.

• All Shipping and Handling cost will not be refunded.

• We reserve the right to charge a twenty-five percent (25%) restocking fee.

• The warranty does not extend to the electronic equipment that is used or which incorporates with any of our products and accessories. We shall not be held responsible for the improper use of the product(s).

• Roxsen are not responsible for lost or stolen packages. We recommend that you keep proper proof of delivery.