40 Gallon Batch Biodiesel Processor
Here we have made a simple yet efficient machine for making biodiesel. If you are not aware of the details about biodiesel or the process of making biodiesel do not hesitate to ask any questions to
brent_seay@yahoo.com .
Specs:
Makes biodiesel using waste vegetable oil for $0.70 a gallon!
60 gallon cone bottom mixing tank
15 gallon cone bottom methanol and naoh mixing tank
Both tanks are 100% full draining, You wont find that on most processors under $3,000.
Both tanks are mounted on stands
110v 1/2 hp 12 gpm motor
100% Assembled! OTHERS MAY COME IN PIECES, OURS WILL COME TO YOUR DOOR 100% TOGETHER!
Brass Misting Wash System with 6 heads for full washing capabilities
Produces 20-40 gallon batches with about 1 hour hands on time.
Single 4 hour Timer to control pump (Reduces labor time)
Comes with an easy instructional manual to get you started, along with a fully labeled machine corresponding to instructional manual.
Simplified Steps
I will explain the process in a 1-2-3 form, simplified, As the process is not very hard. To really get started in biodiesel, you need a good setup. Buying equipment will be your quickest way to efficiently make biodiesel.Once your system is setup you simply repeat the process over and over
. The kit comes with a manual to walk you through each step.
2. Dump oil in heater drum, heat to 130 degrees.
3. The machines motor will suck the oil into the left tank tank.
4. Test the oil to determine the amount of lye needed.
5. Mix methanol and lye in smaller tank.
6. Turn motor on. Methanol mix from small tank will go into large tank.
7. Let motor run for 60 minutes to circulate mixture.
8. After 8-12 hours drain 6-8 gallons of glycerine.
At this point you have biodiesel, but it is a "dirty" biodiesel. What is recomended is to do a water wash, which comes on each machine....
9. Turn timer for water wash. Water will begin to mist over biodiesel.
10. After timer has shut off, drain 5-6 gallons of water.
11. Repeat this process 2-3 times until wash water is clear.
12. Begin drying your biodiesel by having the motor ciculate the biodiesel inside the larger tank.
13. Biodiesel will turn a golden clear, and your process is done and ready to use!
The whole process can take as little as 24 hours, and costs about .70 a gallon to make.
Unique Features
- Polypropylene Floor for Fast Cleanup (Wood will not last as it absorbs biodiesel)
- Simple plumbing, Anyone can run this machine.
- Comes with Wash timer, (again reduces labor time).
- Methanol Fumes Contained in machine for fume-less operation.
- Key feature, is the pump slides up and down, no other machine on the market to date has this. Slide it down so you dont have to prime it everytime, Slide it up so you can efficiently drain off the Glycerin!
- You can pay this processor off in no time at all with a savings of $4.00 a gallon!
The price is $1900 for the processor.
I am located in Roscoe, Illinois
Pick up or delivery can be arranged. Any questions or comments dont hesitate to ask.
Brent_seay@yahoo.com Thank you
Brent Seay
815 979 2583
Roscoe, Illinois 61073
Depending on inventory, machine delivery will vary. Very reasonable shipping rates, do not be discouraged by distance!
Email for shipping price!!
Additional Items Needed
**You can purchase from us or on your own
Barrel Heater $200 You heat the oil in a steel 55 gallon drum, wrap this heater around it, has a thermostat.
Mehtanol Hand Crank Pump $45 Pumps the methanol from the drum to the small tank.
Scale $30 This 2000 gram scale will measure your lye and includes a easy pour bowl.
Titration Kit $55 Full kit including 1 gram scale to test your vegetable oil.
Temperature probe $30 Tests temperature in heater barrel, also comes with 4 ft dowel rod.
These items are sold seperatly and are needed to make biodiesel
You get what you pay for, if you see a cheaper processor or even one more expensive, compare it to the one we sell.
Watch out for:
- An abundance of pvc pipe
- Tubing going everywhich way will not allow for proper draining.
- Are the tanks full draining?
- Mixing methanol and lye with blue pumps is NOT recomended
- Are there wash timers and pump timers for added safety?
- Does the system look clean and easy to use?
- Is the system 100% Assembled?
-And by far the biggest concern, Is the lowest part of the processor the DRAIN?
You may spend more initially but in the long run you will have a well built machine that is easy to use and works efficiently. Is it worth the time and effort buying a cheaper processor?
**Now offering Dealership Programs with the purchase of a machine (required to become a dealer). You can contact Brent Seay 815 979 2583 with any questions. Never See, Touch, or Assemble a processor you sell, ships 100% complete from the factory to your customers door! Increased Incentives for motivated sellers.
*******************************************************************
We are proud to be Ebay Power sellers, which represents a level of business, customer service and satisfaction that is not available to just anyone. Please note that we are professional Ebayers and bid with confidence.
We appreciate your business.
Track up to 10 items on this computer in 
)
