Iron-On T Shirt Transfer Paper for White or Light Coloured Fabrics
200 Sheets A4 only £77 including UK 1st. Class Recorded Delivery !!
from
Suppliers of the best selling bulk ink on eBay
Our JetStream brand transfer paper for light fabrics is manufactured in Switzerland to the highest quality standards. Suitable for use with any inkjet printer (not for use in laser printers !!) using either dye based or pigmented inks. Images can be transferred using a domestic iron or commercial heat press.
Suitable for transferring black & white or coloured images onto white or light coloured T Shirts. Fabric should be at least 50% cotton (eg 50% cotton/50% polyester). Best results are obtained on 100% cotton.
This transfer paper has the unique THERMOK! indicator system to show when your transfer has been ironed sufficiently. The backing paper is printed with orange iron symbols inside a green circle. Continue ironing until the green circle turns orange, then your transfer is ready.
MAIN CHARACTERISTICS
-
THERMOK! indicator system - perfect results everytime !!
-
Brilliant, vivid colours
-
Sharp prints with no bleeding or feathering
-
Prints onto white or pastel-colored fabrics (minimum 50% cotton)
-
Hot or Cold peel
-
Matt or Gloss finish (see detailed instructions below)
-
Machine washable up to 40°C
-
Suitable for all inkjet printers using dye based or pigmented inks
DETAILED INSTRUCTIONS FOR USE
You will need:
JetStream T Shirt transfer paper, an ink-jet printer, a domestic iron or commercial heat press and a flat, hard and smooth surface to iron on (do not use an ironing board), a sheet of standard white copy paper and a suitable item to transfer onto, such as a white or pastel-coloured T-shirt, baseball cap, boxer shorts, cloth-covered mousepad, cotton napkins, handkerchiefs, etc.
1. Printing
-
Store JetStream T Shirt transfer paper in its original packaging in a cool, dry place.
-
Only print onto the unprinted, coated side of the transfer paper. Select the "mirror image" mode on your printer. Use single sheet feed only.
-
Printer settings: Transfer Paper Mode, if available, or Normal Paper using best print quality.
-
After printing, leave image to dry for approx. 5 minutes. Cut out the motif, leaving a narrow margin of 1-3 mm around the edge.
-
Tip: First print the desired motif onto standard paper to check that the colour and size are correct and that the motif is reversed for correct printing onto the garment.
2. Transferring
-
Prepare a stable, heat-resistant surface suitable for ironing on. A towel on a kitchen table is suitable.
-
Preheat the iron to the highest setting (takes approx. 5-10 minutes). Recommended ironing temperature: 210°C (410 °F). Do NOT use travel irons, they do not have enough heating capacity for this application.
-
You can also use a commercial heat press. Recommended transfer temperature: 200°C (392°F). Press for approx. 18 seconds.
-
Briefly iron or press the fabric to ensure that it is completely smooth, then place the transfer film onto it with the printed image facing downwards. If using a domestic iron, do not use steam.
-
Iron the transfer paper, applying as much pressure as possible. When moving the iron to a new area, less pressure should be used. Don't forget the corners and edges.
-
Continue ironing until the green circle has changed to the same orange colour as the iron symbol that is printed on the backing paper. In order to guarantee a perfect transfer, at least 90 % of the green area must change colour.
-
Possible brownish discolouration of the white areas of the backing paper will not affect the quality of the transfer in any way.
-
In order to achieve a matt finish, remove the backing paper while it is still hot. Peel away from the fabric in a smooth, even movement, starting from one corner.
-
For a glossy finish, allow the transfer to cool, then peel off the backing paper in a smooth, even movement, starting from one corner.
3. Fixing
- The fixing process removes any surplus ink from the transfer and gives the transfer a fabric-like texture.
- Matt finish: Allow the transfer to cool, then cover with a sheet of standard, white copy paper and press once again with the iron for 5-10 seconds. Immediately remove the paper while it is still hot.
- Glossy finish: As above, except use greaseproof paper instead of copy paper and only remove when cold.
4. Washing
- Wash the garment before using.
- Wait 24 hours before washing for the first time (curing time).
- Fabrics bearing transfers are machine-washable up to 40° C. Always wash garments inside out.
- Do not use aggressive washing detergents or bleach of any kind.
- Air dry only - Do not tumble-dry.
- Avoid ironing directly over the transferred motif. Cover first with a sheet of white copier paper, a sheet of greaseproof paper or iron on the reverse side.
- Tip: You can revive the colours after several washings by repeating the fixing process (see point 3 above).
Professional Inkjet Media
from
Suppliers of the best selling bulk ink on eBay
Other pack sizes and types of T Shirt transfer paper are available.
Please check out our eBay shop 
for the full range.
Check out our other items!
Be sure to add us to your favourites list!
If you produce a lot of transfers and want to save on your printing costs, check out our range of Continuous Ink Systems for EPSON printers. Up to 80% cheaper than using compatible cartridges !!
|
|
| Bulk Ink Systems |
| Check out our full range of Bulk Ink Systems for EPSON printers. Click on the link above to go to the Bulk Ink Systems page in our eBay shop. | | | | |
|
| |
|
| |
Need Tee-Shirts?
|
Cotton T-Shirts for use with T-Shirt Transfer Paper |
|
|
|
| Tee Shirts |
|
Click on the link above to go to the Tee Shirt page of our eBay shop. These shirts have been selected to give optimum results with our Transfer Paper | | | | |
|
| |
|
| |
Powered by eBay Turbo Lister
On 03-Dec-08 at 23:47:10 GMT, seller added the following information:
Powered by eBay Turbo Lister
Back to homepage
) 
Signal Inkjet Supplies
Print
Report item
